General Information
The front and rear brake fitting and the pressure line fitting to the pump are all 3/8"-24 IFF.
Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.
Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.
The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.
Specs
Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.
The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.
The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.
The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod has 3/8"-24 thread and will adjust from 5-3/4" to 6-3/8" from the face of the master cylinder mounting flange.