|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
•
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|  |
|
Home > Street Rod Parts > Slave Cylinders
|
 |
|
SPEEDWAY PULL TYPE SLAVE CYLINDERS
|
Speedway pull type slave cylinder for clutch use. 7/8" bore, female 1/8" NPT inlet. For most multi-disc clutch set-ups we recommend the use of a 3/4" master cylinder. For Stock and Ram couplers, use 7/8" master cylinder.
|
|
|
|
|
Specs- 7/8" bore
- 7/8" stroke
- Overall length is adjustable from 10-3/4" to 11-1/2"
- Length is retained by a lock nut
- Both shaft ends are 5/16"-24 fine RH male thread for clevis or rod ends
- Ram shaft is 3/8" O.D.
- Cylinder body is 4.09" long
- Bleeder and inlet opening are both 1/8" NPT
- Bleeder adapter and bleeder are included
- 1/8" NPT to 3/8"-24 IFF adapter is included for the line attachment
- Cylinder body is 1-7/16" O.D. at end by fittings
- Cylinder body is 1-3/8" at opposite end of fittings
|
|
|
|
|
|
|
|
|
|
You May Also Be Interested In
|
|
|
|
|