Specs
- 32" primary tube length
- 2" primary tube diameter
- 3-1/2" collector diameter
- A = 25-1/4"
- B = 5-1/2"
- C = 29-3/4"
This header actually goes upward from the head instead of down before dropping over the frame rails. From the top of the head flange to the top of the tubes is approximately 9-1/2".
Warranties
AHC coated headers will burn and be damaged at exhaust temperatures above 1300 degrees. An excessively lean fuel mixture can generate exhaust temperatures over 1700-1900 degrees. If the coating is burned (which will look like a dull gray) due to a lean condition, it is not warrantied, but the headers can be recoated.
Not legal for sale or use in California on pollution controlled motor vehicles.