Fits 1933-34 Ford passenger cars. A perfect replacement for your missing, butchered up, or hole-filled original. Bare steel.
This firewall has a
3/4" flange on the sides and top under the cowl area. This is a smoothie
firewall and not the OEM replacement that had large rolled beads in a V
pattern. The very upper
section under the cowl has three small beads rolled into it
horizontally.
From the sides,
towards the center 4-1/2" there is a corner at approximately 30 degrees and turns
rearward 3". The flat area at rear of
engine is 19" wide. This is not a
completely recessed firewall, only in the area rear of the
engine. Flange on sides and
top are for plug welding in original location and further recessing would
require additional fabrication.