Those of you running a T-bucket or roadster type steering column will love this one. Or if you are adding turn signals to an existing car, this is the hot set-up.
It is available in two configurations: one taillight bulb per side (910-64070), or two (910-64050).
This module eliminates the need for turn signal flashers, hazard flashers and/or a traditional turn signal switch. It measures only 2-1/4" x 1-5/8" x 5/8" and will fit most anywhere. Simply mount two small momentary push button switches (available from Radio Shack) anywhere that is convenient, and connect the eight color coded wires into your harness.
The flash is consistent whether using incandescent or LED bulbs. 12 volt bulbs up to 6 amps total. Measures 2-1/4" x 1-5/8" x 5/8".
Here's how it works:
- Press the appropriate button for 1 second and the turn signal light will flash for 7 seconds, then self cancel.
- Press for 2 seconds and it will flash for 20 seconds, then self cancel.
- Press for 4 seconds and it will flash for 75 seconds, then self cancel.
- Press the same button a second time to manually cancel.
- To activate the hazard flashers, press both buttons at once. To disengage, press again. (They will flash until disengaged).