STOCK CLUTCH HYDRAULIC THROWOUT BEARINGS

Specs

910-25610  

• Collapsed distance from bearing face to back is 1.688"
• Full distance from front to back is 2.375"
• Available stroke is 0.688"
• Bearing now includes a retainer ring to prevent over-extension

910-25612

• Compressed dimension is 1.516"
• Extened dimension is 2.065"
• Suggested master cylinder bore is 3/4"
• Fits 1.379" transmission collar
• The fluid inlet fitting is AN 4,
• The hole in the bearing for the inlet fitting is 1/8" NPT

Application

910-25610 Bearing typically used with: 

• Jerico 2-speeds 
• Saginaw 3-speeds
• Muncie 4-speeds
• Saginaw 4-speeds
• B-W 4-speeds
• Jerico 4-speeds
• Works with most stock type clutches

910-25610 Bearing will NOT work with:

• B-W T-5 transmission without alteration of the nose cone. Howe has a separate number for the T-5 transmission, but neither will work with the Ford type T-5.
• Ram coupler 
• may not work with racing style clutches because of limited extension on our hydraulic throw out bearings. The extension on our 910-25610 is .789" of travel.

910-25612

• This hydraulic clutch release bearing is designed to be used with GM base T-5 five speed transmissions. NOT Ford.