No items in Shopping Cart
These polyurethane bushings have the center hole offset 1/4" to allow you to compensate for wheel or pinion angle issues. Fits 1965-88 GM midsize rear control arms.
These polyurethane bushings have the center hole offset 1/4" to allow you to compensate for wheel or pinion angle issues. Fits '65-'88 GM midsize rear control arms. Sold per pair. (One pair equals 2 bushings)
Popular for GM Clip. Universal design for RH or LH use.
Offset type upper control arms. Available with IMCA approved steel cross shaft or lightweight aluminum cross shaft.
You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications.
These 4130 chromoly metric upper control arms are 40% stronger than standard control arms.They bolt to a stock mount and use the bolts in ball joints. Steel cross shaft.
91034362Centerline of Holes6.000"Tube O.D.0.760"Hole Diameter0.560"Material TypeSteelFinishZincSold in QuantityEach
Direct replacement for AFCO upper control arms1/2" mounting holes, 6" on centerAluminum
91031133-LCenterline of Holes6.875" (6 7/8")Center to Center8.500" (8 1/2")Tube O.D.1.000"Shaft Diameter0.726"Material TypeChromolyFinishPaintedSold in QuantityEach91031133-RMounted Length10.000"Centerline of Holes6.875" (6 7/8")Center to Center8.000"Tube O.D.1.000"Shaft Diameter0.726"Material TypeChromolyFinishPaintedSold in QuantityEach
3/4" I.D.1/2" longTapered for heim clearance
91034311Overall Length16.000"Overall Width5.500" (5 1/2")Center to Center13.000"Bushing MaterialPolyurethaneMaterial TypeSteelFinishPowder CoatSold in QuantityEach
5/8" ID7/8" OD Choose 1/4", 1/2", 3/4", 1", or 1-3/8" long
91034318-LOWOverall Length3.380"Diameter Small End1.440"Diameter Big End1.500" (1 1/2")Inside Diameter0.515"Material TypeSteelFinishNaturalSold in QuantityEach91034318-UPOverall Length1.625" (1 5/8")Outside Diameter1.455"Inside Diameter0.635"Flange Diameter2.000"Material TypeSteelSold in QuantityEach
These tubular upper control arms are available in either an offeset or strut style and aluminum or steel cross shaft. They accept K6024 or K6136 style ball joints.These control arms have a 6" center to center mounting bolt pattern.
You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember.
You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications.Tubular Control Arms Application Chart
You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1' diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications.Tubular Control Arms Application Chart