Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit

SAME DAY SHIPPING! Order within the next 13 hours 54 minutes and receive same day shipping

Specs
Material Type:
Stainless Steel
Overall Length:
24.00
Sold in Quantity:
Pair
Notes
Includes fittings for 16MM or 5/8"-18 as well as 14MM or 9/16"-18. Banjo bolts fit both O-ring or IF style fittings. Crush washers will compress to get 3 threads of engagement once torqued.
Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit

Click image to enlarge

Speeday Motors Logo
X
Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit

Details

Reviews

Q & A

What's in the Box

These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

The kit includes:

  • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
  • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
  • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
  • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

617-4835 Instructions (PDF) 

Application

This kit will fit our:

  • 1982-88 T-Bird rack/pinion # 91034340-POW
  • P/S pump # 91032922-GM
  • P/S pump # 91032908-BLK  
  • P/S pump # 91032908-CHR

You may also be interested in:

-6 AN O-Ring Fittings for 1982-88 T-Bird Power Rack & Pinion
                        These fittings are for our 910-34340-POW '82-'88 Thunderbird power steering rack only. Pressure fitting is 14mm O-ring to -6AN. Return fitting is 16mm O-ring to -6 AN.
                    
5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
                        

Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.

Fitting 617-4830 fits our:

  • P/S pump # 91032922-GM
  • P/S pump # 91032908-BLK  
  • P/S pump # 91032908-CHR

WARNING:  Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
                        

Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

Kit includes:

  • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
  • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

 

910-32535 Instructions (PDF)

91032535 CPP Instructions (PDF) 

Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
                        These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

  • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
  • Powder coated black or chrome
  • Keyed shaft for easy pulley intallation
  • Pulleys available in plain, polished, and chrome
  • 6" diameter pulleys not included

Works well with small block Chevy engine brackets 916-67920 or 913-32902.

Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
                        These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
                    
New T-Bird Power Rack for Mustang II Crossmembers
                        

Power Steering rack fits aftermarket Mustang II crossmembers.  

Fits aftermarket Mustang II crossmembers. Available in power steering. Mount bushings are included.

POWER: Power rack modeled after the 1982-88 T-bird design with fitting port threads provided with a 9/16"-18 and 5/8"-18 O-ring threads. Also fits aftermarket Mustang II crossmembers. Bushings included. Uses a 3/4"-36 spline U-joint. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators).  Overall width is 45-1/8". 15-1/2" mount centers. Power rack does include the rack mounting bushings and male AN# 6 adapter fittings.