Moroso Chrome 14 Inch Air Cleaner
Click image to enlarge
Please NOTE the following about this product:
- This product is discontinued.
Q & A
What's in the Box
You may also be interested in:
Speedway Air Cleaner Base GasketMore Info
Professional Products 20001 Airflo Insert, Holley/Demon w/o ChokePrice: $29.99More Info
Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.More Info
Moroso 65910 Chrome Air Cleaner, 14 x 3 InchPrice: $54.99More Info
Replacement Paper Air Filter Element, 14 x 3 InchMore Info
Outerwears 10-1141-01 Black 14 x 3 Air Cleaner Pre-Filter CoverMore Info
Seals between air cleaner and standard 5-1/8" air horn. Prevents dirt from entering your engine. This reusable Speedway gasket has stainless steel ring embedded in durometer-tested neoprene rubber. Won't collapse, tear or lose its shape.
The air coming into the air cleaner is pulled from each direction and tends to crash into itself when it meets above the carb, which causes turbulence. This insert slides over the air cleaner stud and directs the air down into the carb, eliminating that turbulence. For Holley and Demon 4 bbl carbs without a choke horn. Easy 5 minute installation!
Dyno shows a 7-10 horsepower gain!
See How It Works (Link)
Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 3" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also comes with mounting hardware and PVC smog fitting adapter.
- This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
- The top of the air cleaner sits 2-5/8" above the top flange of the carb.
Chrome Deep Dish Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
- Chrome plated steel
- 14" diameter and 3" tall filter element
- Fits 4 barrel carbs with 5-1/8" neck
- Includes stud and wing nut
- Triple process plating for brightest finish and long life
- Non-restricting, flame proof filter
- Performance designed for increased breathing
- Designed for universal applications
- Fits: cars, trucks, minis, 4x4s, street rods, and RV's
14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip. Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.
- Moroso's unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow
- Radiused air inlet is stamped into air cleaner base to reduce overall height
- Back to back dyno testing proves a gain of over nearly 10 horsepower over running no air cleaner at all
- Overall stacking height above the carburetor lip of only 2-1/2"
- Fits all Holley, Carter, Rochester, and Edelbrock carburetors with 5-1/8" dia. necks
Economical replacement 14" diameter paper filter elements.
Made from a durable polyspun material containing uniform micron openings. Recommended by engine builders and professional race teams around the world.
Keep the bigger and most damaging particles of sand, dirt, clay and oil drips from getting to and clogging the fins of your air cleaner element. Fits 14" air cleaner elements. Available 3" tall.
Available in seven colors: yellow, red, orange, blue, pink, purple and black.