No items in Shopping Cart
Authentic reproductionstamped steel grille shellfor 1928-1929 Ford Model A. Has center hood hinge rod bracket installed. Shell is pre-drilled for hood lacing and slotted for attachment to the radiator brackets.
91122103Overall Width22.000"Overall Height27.500" (27 1/2")Overall Thickness4.000"Inside Width19.000"Inside Height18.630"Material TypeSteelSold in QuantityEach
Dimensions:Overall height as measured through the opening is 36 1/4 "Width at widest point at rear about midway down is 23 3/8"Width at bottom is 18 1/8"Front of bottom edge to rear edge of mounting tab is 11 13/16"Depth front to rear above mounting tab is 3"Front to rear at top is total of 8 1/4 " at center (This includes the extended area at radiator cap of 2 1/8")Recess for radiator neck is 2 1/2 " I.D.Front to back of side at upper corners is 6"Front to back of side midway down ...
This stone guard for radiators is made of fully polished stainless steel. Stone guard comes with attachment hardware and rubber cushions. The guard has tabs for the 4 cushions to isolate it from the grille shell.
Griffin Aluminum radiators give superior cooling over a brass/copper radiator. Features 2 rows of 1" tubes furnace brazed into the core which provides 40% greater tube-to-fin contact over a copper/brass radiator. WILL NOT fit a stock '27 grille shell, but it will work with our 900-2000 fiberglass shell.
1917-1927 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.
1906-1916 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.
This fiberglass grille shell accepts 1932 Ford passenger grille inserts (available seperately). Features a glossy gelcoat finish that is ready for paint preparations.
This stock height 1932 Ford grille shell has a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction.
This 1932 Lo-Boy grille shell features a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction. 4-1/2" chopped from stock height.
91132001Overall Diameter3.630"Overall Height1.160"FinishChromeSold in QuantityEachNotesThis cap comes with (2) oversized washers that can be used to secure it permanently to the grille shell. This is handy when the customer's radiator does not have a 'dummy' neck.
The 1930-31 fiberglass grille shell has a filled radiator hole. Same dimensions as original. It even has the hood lip.
Latest high efficiency core with a 6" chop. Perfect fit with Lo-Boy grille shell and grille insert.The standard brass/copper version is best for mild small blocks.
Latest high efficiency core designed with Chevy-style outlets. Perfect fit with Lo-Boy grille shell and grille insert. Super duty, all aluminum construction is ideal for high compression or supercharged engines.