If you are swapping a LS1 or LT1 into your hot rod, you will need these fuel line adapters from Russell Performance. They snap right onto your existing quick disconnect on the hard line and allow you to use AN6 fittings and hose. The 3/8" is for the fuel feed line and the 5/16" is for a return line if needed.
To make your LS1swap a little less painful we put together these 2-in-1fuelfilterand fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump order the filter/regulator/pump kit 910-12805.This kit includes required fuel rail fitting along with the filter/regulator assembly.The EFI fuel regulator pressure is fixed at 58 psi.Hose and additional fittings sold separately.Principal Application: Chevrolet Corvette (99-04)Style: Fuel (Complete In-Line) FilterService: FuelType: Full FlowMedia: PaperNominal Micron Rating: 5
To make your LS1 transplant a little less painful we put together these kits for you. If you already have a fuel pump in the tank use the filter/regulator kit 910-12800. This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi a filter/regulator assembly and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.Hose and additional fittings sold separately. ...
If you are swapping a LS1 or LT1 into your hot rod you will need these fuel line adapters from Russell Performance. They snap right onto your existing quick disconnect on the hard line and allow you to use AN6 fittings and hose. The 3/8" is for the fuel feed line and the 5/16" is for a return line if needed.