Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Lokar Universal Black Throttle Cable Kit

SAME DAY SHIPPING! Order within the next 5 hours 2 minutes and receive same day shipping

Specs
Sold in Quantity:
Each
Color:
Black
Overall Length:
-
Outside Diameter:
.25
Notes
The cable its self measures 37" and can be cut to fit.
Lokar Universal Black Throttle Cable Kit
Lokar Universal Black Throttle Cable Kit
Lokar Universal Black Throttle Cable Kit
Lokar Universal Black Throttle Cable Kit

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

491-1000U Instructions (PDF)

Customer Reviews

Rated 4.7 out of 5 by 16 reviewers.
RATING BREAKDOWN
16 reviews
5 Stars
13
4 Stars
1
3 Stars
2
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Hacksaw
Verified Purchaser
vermont

I've bought several of these-geat product

June 29, 2015
Easy installation
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Z-MAN
Verified Purchaser
Verified Reviewer
Fairport , NY

Lokar 36" throttle cable

June 03, 2015
Great product for any hot rod, street rod , or rat rod . Easy to install , great product
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

pipewelder

works great

March 26, 2015
works great, billet specialty suggested i buy this because it fit their throttle pedal and they did not make a throttle cable for their pedal and i did not buy a lokar pedal
Pros:
  • Good Fit
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

razorman
Verified Purchaser
Oregon, USA

great product

March 16, 2015
The lokar black throttle cable kit work's great and the installation was very will written and easy to follow.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

26roadster
Verified Purchaser
Lakewood CO, USA

Fit perfect

February 12, 2015
Just what I needed and got it in 2 days. Glad I found this website. Will be my first search for parts from now on.
Pros:
  • the best i have found.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

IOWARON
Verified Purchaser

Lokar...always a great quality

October 06, 2014
Love doing business with Speedway as the parts arrives usually the very next day. If I need to return something, there has never been any problem A great place to purchase from!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Vette66red
Verified Purchaser
Aspen, CO, USA

High quality,easy installation

September 11, 2014
Have used this on my Series iia Land Rover with aftermarket carb,easy installation .
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

woody
Verified Purchaser
North Vernon, IN

LOKAR THROTTLE CABLE (USER FRIENDLY) #1

January 07, 2012
i operate a shadetree fabrication shop. i build, & restore old streetrods. i have found LOKAR cables, to be one of the easiest to use, & fabricate with. I would not buy any other. sincerely, "woodys fabrication" North Vernon, IN
Pros:
  • Easy To Install
  • Durable
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ryno
Verified Purchaser
sw mo

good product

October 17, 2011
good , easy to use product that you can bend and not bind, with the teflon liner
Pros:
  • Teflon liner
  • Durable
  • Easy To Install
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

G.D.
Verified Purchaser
Libertyville, IL

Great looks, Poor performance

September 16, 2011
Purchased as a replacement on my street rod after overheating caused the (same) prior cable to melt enough to cause the throttle to stick and creat dangerous conditions.
Pros:
  • Easy To Install
  • Looks professional
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 3 answers

1 answers

cable end ref# item#4911000u. Is the carburetor end of the Lokar cable adapter available? I have a very early Lokar throttle cable that had an eyelet and stud adapter and would like to update my installation. Ron

ronaldj
March 31, 2014

cable end ref# item#4911000u. Is the carburetor end of the Lokar cable adapter available? I have a very early Lokar throttle cable that had an eyelet and stud adapter and would like to update my installation. Ron

Answers

April 01, 2014
EricM
We apologize but currently we do not offer service parts for the Lokar products. You may want to call them direct for availability.
1 answers

Can I cut down the housing length along with the cable length?

April 30, 2012

Can I cut down the housing length along with the cable length?

Answers

May 03, 2012
Jason
Yes, you can shorten both housing and cable
1 answers

Will this fit a 1986 s10 blazer with small block chevy

s10
pipe creek texas
June 22, 2015

Will this fit a 1986 s10 blazer with small block chevy

Answers

June 22, 2015
Eric
Expert
This is a universal throttle cable that is made for use with after market throttle pedals and carburetors. If you need a stock replacement cable then no this will not work. Sorry we do not offer a replacement cable for your application.
Page 1 of 1

You may also be interested in:

Stainless Carburetor Return Spring Set
(Part #4914002)
                        Polished stainless steel carburetor return spring set. Universal dual spring design provides a safe, reliable throttle return when compared to single spring set-ups.
                    
Lokar SRK-4000 Carburetor Bracket and Throttle Return Springs
(Part #491SRK4000)
                        

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

Lokar Hi-Tech Stainless Throttle Cable Kit
(Part #4911000HT)
                        

Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
(Part #491104)
                        This slick billet aluminum bracket mounts at the back of your Edelbrock carb and makes throttle cable, return spring and kickdown cable mounting easy. Includes zinc coated allen head bolts measuring 1-1/2" in length.
  • CNC machined from 6061-T6 billet aluminum for strength and style
  • Bracket designed to fit single or dual quad carbs
  • Easy installation of Lokar Throttle Cable and Kickdown kits
  • Dual Stainless Steel Return Springs
  • All hardware and detailed mounting instructions included
  • Recommended by Edelbrock
  • Attaches to both rear and carb bolts to eliminate bracket movement
  • Bracket utilizes either bolt pattern offered on Edelbrock carbs & manifolds
Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
(Part #49141000)
                        These Lokar stainless throttle cable brackets mount  to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual  carburetors. These brackets are used to mount Lokar's throttle cable and  kickdown assemblies.
  • Mounts to carburetor base
  • Accepts Transmission Kickdown Cable
  • Accepts Throttle Return Spring
  • Return Spring Included
  • Hardware Included
  • Stainless steel bracket
  • Black powdercoated
  • Sold individually
Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
(Part #491105)
                        Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs.
  • Black anodized
  • CNC machined from 6061-T6 billet aluminum for strength and style
  • Bracket designed to fit single or dual quad carbs
  • Easy installation of Lokar Throttle Cable and Kickdown kits
  • Dual Stainless Steel Return Springs
  • All hardware and detailed mounting instructions included
  • Recommended by Edelbrock
  • Attaches to both rear carb bolts to elminate bracket movement
  • Bracket utilizes either bolt pattern offered on Edelbrock carbs and manifolds
Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
(Part #49110024)
                        These Lokar Midnight Series hi-tech throttle cables have a  PTFE inner liner and a black stainless steel outer covering, along with  aluminum clevis ends for smooth, no-bind cable operation. They can be  easily adapted to fit most gas pedals and throttle assemblies. 
  • 24" long
  • Universal
  • Black, braided stainless steel cable Jacket
  • Braided stainless wire
  • End Fittings Included
Note: Stock photo used, product may differ per the application.

Item Details

24"
Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
(Part #491100036)
                        Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits.  The kit is   equipped with a Throttle Cable in stainless housing plus our  Stainless  Steel Carburetor Bracket and Return Spring Kit.  Duo-Pak only  available  for carbureted applications with Holley, Edelbrock, AFB,  Quadrajet and  In-Line Dual Quad carbs.
                    
Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
(Part #491100048)
                        

All Lokar Hi-Tech Throttle Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 48" lengthswith a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

 

Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
(Part #49110036)
                        

Lokars "U-Cut-to-Fit" Hi-Tech Throttle Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. 36" throttle cable features aluminum fittings with ferrule to eliminate frayed cable ends. These throttle cables are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our throttle cable with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit.

Note: Stock photo used, product may differ per the application. 

Item Details

36"
Speedway Carburetor Bracket and Throttle Return Springs
(Part #4914000)
                        Stainless throttle cable bracket & spring set. Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quad carburetors. Dual spring design provides a safe, reliable throttle return when compared to single spring set-ups.

Note: There is no provision in this bracket for an automatic transmission.