Weld-on front leaf spring bracket mount for Chrysler springs. 5/8" hole w/ an inside width of 3-3/16". Center of hole to the top of the bracket is approximately 1-3/4".
Weld-on front leaf spring bracket mount for Chrysler springs. 5/8" hole with an inside width of 3-3/16". Center of hole to the top of the bracket is approximately 1-3/4".
These headlight and shock mounts were originally designed for our T-buckets.Mounts boltonto the outside edge of the frame rail and include a set of 1-3/4" leaf spring shackles that have an extended stud for lower shock mounting. Mounts have 1/2" holes for Dietz style or other headlightsHas two different 1/2" hole locations for upper shock mounting Measures 6" from the upper shock mount hole to the top of the frame railChoosePLAIN or STAINLESS shackles
These are the headlight and shock mounts we designed for our T-buckets. They were designed to be welded to the outside edge of the frame rail and include a set of 1-3/4" leaf spring shackles that have an extended stud for lower shock mounting. Mounts have 1/2" holes for Dietz style or other headlightsEach mount has two different 1/2" hole locations for upper shock mounting For use with radius rod front suspensions and Speedway T-Bucket 4-bar kits. Will not work with Model A and newer 4-bar kits. 715-150 Instructions (PDF) ...