Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

11 Inch Fuel Cell Fuel Level Sending Unit, 240-33 Ohm

SAME DAY SHIPPING! Most orders ship within 24 hours.

11 Inch Fuel Cell Fuel Level Sending Unit, 240-33 Ohm

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These bolt-in fuel level sending units feature a positive seal and a 2.3" O.D. bung. For Stewart Warner and Auto Meter style gauges with 240-33 ohm range.

Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units

Item Details

240 ohms Empty, 33 ohms Full

Customer Reviews

This product has no reviews.

Product Q&A

3 questions : 3 answers

1 answers

how to install how to instal in a plastic fuel cell from the outside only ?

banksy
moore ok
February 01, 2015

how to install how to instal in a plastic fuel cell from the outside only ?

Answers

February 02, 2015
Tech
You can either cut the inside ring with a hacksaw and put about a 1/2" groove in it, and then fish it into the cell or you can use self tapping screws and screw the sender directly into the plastic cell. Both are acceptable methods and should yield good results.
1 answers

Do you have a sender for a 10 inch deep tank?

Hunter97
July 12, 2014

Do you have a sender for a 10 inch deep tank?

Answers

July 14, 2014
EricM
Sorry I do not have this style of sender for a 10" deep tank. You may want to look into using a swing type sender such as 665385B or 665385C which is adjustable for different depths of tanks.
1 answers

I have Stewart Warner Wing Gauges and my fuel tank is 16" deep will this work? Thank You GOD BLESS James

papas 32
Fort Worth Texas
August 02, 2011

I have Stewart Warner Wing Gauges and my fuel tank is 16" deep will this work? Thank You GOD BLESS James

Answers

August 04, 2011
John
This sender works with tanks 11-11 ½” deep and if used in a deeper tank it will not read the capacity past the 11 ½” depth and there would be reserve capacity in the tank not registered on the gauge. We also offer the arm style senders for the SW gauges and designed for tanks up to 15” deep under part number 665391A for left hand swing or 665391B for right hand swing.
Page 1 of 1

You may also be interested in:

Fuel Cell Fuel Level Sending Unit, 240-33 Ohm, 8-1/2 Inch
(Part #4588240)
                        

These bolt-in fuel level sending units feature a positive seal and a 2.3" O.D. bung. For Stewart Warner and Auto Meter style gauges with 240-33 ohm range.

Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

Fuel Gauge Interface Module
(Part #91012910)
                        Fuel level gauges are designed to work with  specific sending units that vary from one automobile or gauge  manufacturer to another. Some increase resistance from Empty to Full,  while others decrease as the level goes up. For a builder updating their  vehicle with new gauges, this presents a problem in that the  aftermarket gauges must match the sending unit located in the tank. This  module will allow you to use your stock sender with any fuel gauge. You  no longer have to remove the tank to add a separate sending unit or  modify the sending unit that comes with a aftermarket gauge set.
  • Simply wires in-line between your gauge and existing sender
  • Allows you to use your stock sender with any fuel gauge
  • No need to remove the tank to add a separate sending unit
 
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units
Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
(Part #2751031)
                        Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
  • 240-33 OHM
  • 8 Inch Length 
  • Compatible with both gasoline and diesel
  • Compatible with fuels with up to 10 percent Ethanol
  • Designed to work with any classic fuel level gauge
Classic Instruments SN35T9 Fuel Sender Tube, 9 Inch, 240-33 OHM
(Part #2751032)
                        Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
  • 240-33 OHM
  • 9 Inch Length 
  • Compatible with both gasoline and diesel
  • Compatible with fuels with up to 10 percent Ethanol
  • Designed to work with any classic fuel level gauge
Classic Instruments SN35T10 Fuel Sender Tube, 10 Inch, 240-33 OHM
(Part #2751033)
                        

Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

  • 240-33 OHM
  • 10 Inch Length 
  • Compatible with both gasoline and diesel
  • Compatible with fuels with up to 10 percent Ethanol
Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
(Part #2751034)
                        

Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

  • 240-33 OHM
  • 11 Inch Length 
  • Compatible with both gasoline and diesel
  • Compatible with fuels with up to 10 percent Ethanol