Inline Fabricated Filler Neck, 1 1/2 Inch Hose
Click image to enlarge
Q & A
What's in the Box
These 1-1/2" inline hose adaptors allow you to put either a radiator fill cap inline. Use with a bleeder valve to get all air out.
Uses the standard radiator cap such as 91015706.
The overflow port is 1/8" pipe thread.
You may also be interested in:
Cooling System Bleeder-Drain Valve, 1/4 Inch NPTPrice: $5.99More Info
Inline Die Cast Filler Neck, 1.5 Inch HoseMore Info
AFCO 80155 Inline Filler Neck 1.5 OD HosePrice: $39.99More Info
High Pressure Radiator Cap, 22-24 LbsPrice: $9.99More Info
Speedway Coolant Expansion TankMore Info
Aluminum 1/8 Inch NPT Hose Barb FittingMore Info
This 1-1/2" inline hose adapter allows you to put a radiator fill cap inline. Use a bleeder valve to get all air out.
Note: You must use a Stant brand radiator cap in conjunction with this filler neck, such as # 910-15706.
This inline filler neck installs into 1-1/2" O.D. upper radiator hoses. 100% aluminum construction. Includes a 1/8" straight aluminum overflow hose barb.
A must have when racing! High pressure cap for radiators raises boiling point of water.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.
Speedway spun aluminum coolant overflow expansion tanks weigh 50% less than other models. Ideal for filling radiator when level is low. Cap not included.
- AN 8 inlet & outlet
- 40 oz. capacity
Bracket not included. Bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
Learn more about cooling with recovery systems and how they work by reading our tech article. Cooling System Principles.
Use this billet aluminum hose barb fitting in place of the ugly old brass fittings. These aluminum fittings accept 5/16" or 3/8" I.D. hose (must be clamped) and thread into 1/8" NPT.