If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare. Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.
If you choose to use inverted flare hardware on your car Speedway can save you time effort and money. These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools already have a double flare on each end have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.Double wall copper plated steel brake line.High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing.Each end flared with 3/8"-24 fitting. Seven different precut lengths available.Learn more about flaring lines and how to select proper automotive fittings by ...
Here's the item for added strength and durability; double wall copper plated steel brake line. Available in a 25' roll of 3/16" line no nuts included. This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool.Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.Brake System Builder Tip(GIF)Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available. NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.
Complement your -2 brake line kit by completing the system with -2 caliper lines. Durable and flexible stainless steel AN2 lines with AN3 female fittings.
Braided stainless covering over a Teflon inner liner.These are perfect for brake lines clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. Select applicable length. AN size is the "-#" at the end of each part number.
These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually. Stainless steel 90° fitting on one end and a straight fitting on the other Brake lines, clutch lines and gauge lines Available with AN3 or AN4 fittings Sold individually Select applicable length. AN size is the "-#" at the end of the part number.
You have finally found that T56 6-speed to put behind yourChevy V-8and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. OurAN3 braided stainless steel hose isavailable in three lengths: 25" 36" and 48" lengths.You will also want to buy the banjo fitting kits and theWilwood master cylinder. NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed banjo bolts and washers 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.Stainless steel braid over Teflon® hoseReduces volumetric expansion of brake linesReduces brake fadeLess susceptible to debris than rubber lineUsed to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed banjo bolts and washers 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.Stainless steel braid over Teflon® hoseReduces volumetric expansion of brake linesReduces brake fadeLess susceptible to debris than rubber line
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed banjo bolts and washers 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.Stainless steel braid over Teflon® hoseReduces volumetric expansion of brake linesReduces brake fadeLess susceptible to debris than rubber line