No items in Shopping Cart
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
These columns have the same dimensions and features as the Ididit columns available on this website, but are only 16" long instead of 30".
Make your 1957 Chevy more comfortable to drive byinstalling a new Ididit steering column. Ididit tilt steering columns with no shifter willmove the steering wheel back 2" towards the driver. Columns usethe common 1969 and up GM wheel adapters. Choose plain paintable steel or chrome finish.
Available in lengths of 28", 30", 32", or 33" long from steering wheel base to end of their 1" Double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).
These billet aluminum column drops are angle cut to fit the 1932 Ford dash. Fits tiltsteering columns without column shift (2" O.D. tube).
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
These billet aluminum column drops are angle cut to fit the 1932 Ford dash. Fits tiltsteering columns with column shift (2-1/4" O.D. tube).
Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount.The wiring is also easy to hook-up.Requires you to modify the original input shaft on the steering box and you will need the coupler that is sold separately.
Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount.The wiring is also easy to hook-up.Column is a straight bolt-in when used with the new rag joint (also sold separately).
Now you can update your 1955-57 Chevy car with a tilt wheel column. Available in paintable or chrome finish, and with or without a shifter. They accept a 1" DD u-joint or coupler and '69-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2". '55-'57 Steering Column Instruction Sheet (pdf)
These tilt steering columns were designed to fit 1953-56 Ford pick-ups. They are plain steel which allows you to paint them the color of your choice and the wiring plugs right into your harness.Works best with a 4-1/2" to 5-1/2" drop. Accepts common 1969-up GM steering wheels or adaptors and uses 1" DD u-joints.
Now you can update your 1955-57 Chevy car with a tilt wheel column. Available in paintable or chrome finish, and with or without a shifter. They accept a 1" DD u-joint or coupler and '69-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".'55-'57 Steering Column Instruction Sheet (pdf)
These universal tilt steering columns have all the features you are looking for but at a cost you can afford. They accept a 1" DD u-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector.
These universal tilt steering columns have all the features you are looking for but at a cost you can afford. They accept a 1" DD u-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector. The shifter columns include the shift indicator and a straight and offset shifter arm
Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 "tubediameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.
Now you can update your 1955 or 1956 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.
Now you can update your 1957 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, without a shifter.Instruction(PDF)
Now you can update your 1955 or 1956 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, with a transmission shifter.Note:These columns are for use with 3 or 4 speed automatics ...
Now you can update your 1957 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, with a transmission shifter.Note:These columns are for use with 3 or 4 speed automatics (P-R-N-D-L) and ...
This is the boot for Ididit steering column floor mount kits 446-2400, 446-2401, and 446-2402.
This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available.
These universal 5-way adjustable tilt steering columns have all the features you are looking for, but at a cost you can afford. They accept a 1" DD U-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector.Uses a 2" hole column drop.These shifter columns include the shift indicator and a straight and offset shifter arm. Works with 3 or 4 speed automatic transmissions. These do not have the 4 way flasher button.
This kit allows you to run your original automatic column with a GM 500, 600, or 605 series conversion power steering box. Features an improved shift lever design and added clearance at the firewall
These universal 5-way adjustable tilt steering columns have all the features you are looking for, but at a cost you can afford. They accept a 1" DD U-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector. Uses a 2" hole column drop.
Beautifully polished cast aluminum steering columndrop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.