Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor

SAME DAY SHIPPING! Order within the next 6 hours 2 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Color:
Black
Sold in Quantity:
Each
Finish:
Anodized
Gasket(s) Included:
No
CFM:
650
Choke Type:
No Choke
Fuel Type:
Gasoline
MFG. Part #:
0-80802HB
Carburetor Barrels:
4
Secondary Type:
Mechanical
Fuel Inlet Type:
Dual
Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel CarburetorHolley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel CarburetorHolley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel CarburetorHolley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel CarburetorHolley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel CarburetorHolley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

New Features! (LINK)

Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Notes

  • Aluminum Construction
    • Saves 4.5 lbs - 38%
  • Billet Aluminum Metering Blocks
    • Fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors)
    • Power valve channel restrictors now machined lower in metering block for improved fuel delivery to power valve circuit
  • Billet Aluminum Base Plates
    • Stainless steel adjustable secondary link
    • Provides choice of 1:1 or progressive secondary throttle actuation for ultimate control of secondary opening rate
  • All New Fuel Bowl Design
    • 20% more fuel capacity vs. a traditional v-bowl eliminates fuel starvation and provides consistent air/fuel ratios
  • Updated Main Body Design
    • Integrated idle bypass valve eliminates the need for holes in throttle plates and allows for proper adjustment of idle while maintaining correct throttle plate to transfer slot relationship
    • Helps maintain good idle control when using radical camshafts

You may also be interested in:

Holley 0-4777C 4150 Double Pumper 650 CFM 4 Barrel Carb, Manual Choke
(Part #4254777)
                        

Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetors dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lighweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

  • Mechanical secondaries
  • Dual accelerator pumps
  • Manual choke
  • Two corner idle
  • Dual feed fuel inlet
  • Center hung floats
  • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
(Part #42580670)
                        

The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

  • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
  • Vacuum secondaries allow use on wide variety of vehicles
  • Tuneable fuel metering system
  • Dual feed fuel inlet
  • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
  • Ford A/T kickdown, does not work with A.O.D. transmissions
  • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
  • Bolt on & go design
  • Electric choke

Holley 670 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Holley 0-80541-1 HP Crate Racing 650 CFM 4 Barrel Carburetor
(Part #42580541)
                        

Race ready right out of the box! Part of Holley's 4150 HP Series, this gasoline 650 cfm four barrel carb is NASCAR crate engine approved for use in Late Model classes. It has progressive mechanical secondaries, contoured venturi inlets, screw-in air bleeds, high-flow metering blocks, non-stick gaskets, lightweight slotted mixture screws, center-hung Dominator-style fuel bowls, and other great features.

  • Contoured Venturi entry angles and symmetrical venturi bores
  • Screw-in air bleeds for precision tuning
  • High flow metering blocks
  • Viton® Non-stick gaskets
  • Lightweight slotted misture screws for tuning stability
  • Four corner idle system
  • Stainless steel throttle plates
  • Button head throttle plate screws for superior airflow
  • Center hung Dominator style fuel bowls
  • Power valve blow-out protection
  • 100% wet flow tested and calibrated
  • Progressive mechanical secondaries
  • Double 30cc accelerator pumps
  • Venturii size: 1.25"
  • Throttle bore: 1.688"

Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Edelbrock 1806 Thunder Series AVS 650 CFM 4 Barrel Carb-Electric Choke
(Part #3251806)
                        

The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance.

Designed and calibrated for optimum street performance in small-block and some big-block engines. This four barrel carb matches with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

  • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
  • Edelbrock carburetors bolt on and run right out of the box
  • Float levels are factory set; adjustments are rarely needed
  • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
  • Two-piece design means no gaskets below the fuel level for leak-free operation

Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Top It Off Rebate (PDF) 

Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
(Part #32518054)
                        

The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

  • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
  • Includes both timed and full vacuum ports for ignition advance
  • Dual inlets

Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

 Top It Off Rebate (PDF)

Holley 0-80801HB Ultra HP Gas 600 CFM 4 Barrel Carburetor
(Part #42580801)
                        

Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

New Features! (LINK)

Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Holley 0-80803HB Ultra HP Gas 750 CFM 4 Barrel Carburetor
(Part #42580803)
                        

Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

New Features! (LINK)

Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

Holley 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Straight High-Flow O-Ring -8 AN Hose to -8 AN Port Fitting
(Part #6177013)
                        

Straight high-flow O-ring port fitting for 37° AN flare. Blue anodized finish.

High-Flow Port Fitting Application Chart (GIF)

Fitting Thread Application Chart (GIF)

Fragola 491973BL Braswell/Holley HP Carb Adapter
(Part #61740808)
                        
  • 3/4-16 ORB Braswell Carb Adapter 
  • #8 Female Nut
  • Fits Braswell and  Holley Ultra HP Carburetors that utilize 3/4”-16 (#8)
  • ORB inlets
BSB Manufacturing 4711 Telescoping Carburetor Fuel Log
(Part #9104711)
                        

This BSB Manufacturing fuel log slides in and out to fit virtually any Holley style carb. Carburetor fuel line features a three O-ring design to eliminate leakage.

  • Log features -8AN inlet
  • 3/8" NPT rear port
  • Aluminum Fuel Bowl Gaskets included

Note:  Catalog correction- This unit does not feature an 1/8" NPT port.  Fitting # 617-7035 can be used in conjunction with this item when an 1/8" NPT port is required.