Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Hi-Pressure EFI Fuel Filter

Specs
Sold in Quantity:
Kit
Outlet Fitting:
AN-6
Flow Rating:
120 GPH @ 60 PSI
Hi-Pressure EFI Fuel Filter
Hi-Pressure EFI Fuel Filter

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

The modern fuel injected engine requires a much finer fuel filter to protect the injectors. This is made of steel. This is a 10 micron fuel filter and is rated up to 60PSI, flows up to 120 gph and is a necessity for any EFI conversion. It includes an AN 6 inlet and outlet. Mounting bracket included.

 

You may also be interested in:

Auto Meter 2177 1.5 Inch Hi-Vibration Pressure Gauge, 0-100 PSI
SKU-1822177
                        

These 1-1/2" rugged hi-vibration pressure gauges are made to mount directly on the engine to read fuel or oil pressure. Built tough to take it. 1/8" NPT male thread.

1-1/2" Pressure Gauge Installation Instructions (PDF)

MSD 2225 In-Line Hi-Pressure Fuel Pump
SKU-5472225
                        

Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.

  • Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps 
  • Supports most multiport EFI systems up to 500 horsepower
  • Mounts in-line (out of the fuel tank)
  • Roller vane pump mechanism is extremely resistant to clogging and jamming
  • Has 3/8” hose barb inlet and 5/16" hose barb outlet
  • Made in the USA

MSD Rebate (Link)

LS1 Fuel Filter/Fuel Regulator Kit
SKU-91012800
                        

To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

  • Principal Application:  Chevrolet Corvette (99-04)
  • Style:  Fuel (Complete In-Line) Filter
  • Service:  Fuel
  • Type:  Full Flow
  • Media:  Paper
  • Nominal Micron Rating:  5
LS1 Complete Fuel Delivery Kit
SKU-91012805
                        

To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
SKU-91071501
                        

FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

  • For use on regulators or fuel rails with gauge ports
  • Direct mount 1/8” NPT fitting
  • 1.5” diameter gauge face
  • Not for use in passenger or driver’s compartments
Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
SKU-325641600
                        

This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

  • For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
  • Can support up to 600 hp at 40 psi
  • Includes Edelbrock Electric Fuel Pump # 3594
  • Includes Edelbrock Fuel Pressure Regulator
  • Returnless Fuel System
Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
SKU-325641605
                        

This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

  • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
  • Includes Edelbrock Electric Fuel Pump # 3594
  • Includes Edelbrock Fuel Pressure Regulator
  • Returnless Fuel System
  • Supports up to 450 HP
Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
SKU-91018688
                        These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
  • 340 Stealth Fuel Pump
  • Supports up to:
    • 700 HP EFI Supercharged
    • 1000 HP Carbureted Supercharged
  • Black anodized hanger assembly
  • (3) ORB-06 Ports – Supply, Return, Vent
  • Fuel resistant baffle / basket (Includes: Foam and Bladder)
  • Universal high flow pre-pump filter
  • Modular design can be cut to height to fit almost any fuel tank
  • EFI or Carbureted
  • Turbine pump mechanism increases durability.
  • Must be used with a return style system
  • In-tank use only

Fuel Injected Systems Specs and Recommendations Chart (Link)

Carbureted Systems Specs and Recommendations Chart (Link)

LS1 Fuel Filter/Regulator Pump Kit
SKU-91012806
                        

Outfit the fuel system for your LS1 swap with these fuel filter/regulator pump kits.  They feature a Walbro GL392 inline fuel pump (960-392) with all necessary mounting hardware and fittings for a successful installation.  These pumps have a lightweight, compact design for durability and simplicity.

  • Aluminum racing pump
  • 255 LPH free flow rate
  • 60 psi maximum pressure

Includes:

  • (1) Walbro 960-392 Inline Fuel Pump
  • (1) Walbro Installation Kit with Bracket
  • (2) -6 AN Fittings for Walbro
  • (1) LS1 Fuel Filter/Regulator
  • (1) -6 AN to 3/8" Push-On for EFI fitting
  • (2) Blue LS1/LT1 -6 AN-3/8" fittings
  • (1) Blue LS1/LT1 -6 AN-5/16" fitting