Heavy Duty Door Hinge & Latch Kit
Click image to enlarge
Please NOTE the following about this product:
- This item is sold as a kit.
Q & A
What's in the Box
This product has no reviews.
No questions have been asked.
You may also be interested in:
Speedway 1932 Lo-Boy Roadster Body Kit CarMore InfoCompare
Speedway 1932 Lo-Boy Roadster Kit Car Frame AssemblyPrice: $1,999.99More InfoCompare
If you have ever wanted a 1932 Roadster but don't like the cramped cockpit, Speedway has the answer! We started with a clean slate and no expense was spared in the development of this classic street rod. By stretching the chassis and adding 2" to the length of the doors, you are able to get in and out of the car much easier. Also by moving the seat back 2", you have much more leg room and a smoother ride than an original 1932 Ford.
The Speedway Lo-Boy has been one of the most celebrated kit cars ever. Featured in Hot Rod Magazine, Street Rodder, and Rod & Custom Magazine, this car has recieved a great deal of publicity and acclaim. Correctly styled and authentically reproduced, the Lo-Boy Roadster revitalizes the hot rodding spirit that made the 1932 Ford a legend in America’s automotive history books. Designed for nostalgic originality, the Lo-Boy features a unique channeled look, which was quite popular in the early days of hot rodding.
The Lo-Boy body kit features a reinforced fiberglass 1932 Ford Roadster reproduction body, custom floor pan with transmission and driveshaft tunnel, passenger compartment bulkhead panel and trunk floor pan. It also includes functional doors with inner panels installed, as well as a deck lid with inner panel installed. Door jam structure braces, integral rear roll pan and rubber body mounting pads are also included.
The body sits upon our custom 106" wheelbase chassis (sold separately). It is a unique tubular design that channels the body over the frame rails for a nostalgic look.
This product is made to order so quantities may vary. Please allow six to eight weeks lead time.
Body Kit includes:
- Roadster body
- Floor pan
- Passenger compartment rear bulk head
- Trunk floor pan
- Dash panel (smooth)
- Doors w/ inner panels installed
- Deck lid w/ inner panel installed
- Door hinges & brackets (hidden)
- Slimline Bear Jaw door latches
- Door striker plates
- Deck lid hinges
- Deck lid latch assembly
- Rubber body mount pads
See more photos of the Lo-Boy here.
If you have ever wanted a 1932 Roadster but don't like the cramped cockpit, Speedway has the answer! We started with a clean slate and no expense was spared in the development of this classic street rod. By stretching the frame and adding 2" to the length of the doors, you are able to get in and out of the car much easier. Also by moving the seating position back 2", you have much more leg room and a smoother ride than an original 1932 Ford.
The custom 106" wheelbase chassis is a unique tubular design that channels the body over the frame rails and includes the front and rear crossmembers, center K-member, and rear Panhard bar frame mount (installed). Also installed on this frame are the headlight mounts, front upper shock mounts, front radius rod mounts, and front spring mounts.
This frame is made to order. Please call for an estimate on lead time.
- Square tube steel frame rails
- Front & rear tubular steel kick-ups
- Tubular steel center K member
- Welded, mounted suspension brackets include:
- front crossmember
- front spring perch
- shock/headlight mounting tubes
- front radius rod mounting brackets
- center K member
- rear spring mounting pads
- rear shock mounting tabs
- rear Panhard bar mount
- fuel tank support tube (not installed)
- under engine crossmember (not installed)
- 4" drop transmission crossmember (not installed)