GN snout seal is for wide 5 axles.
These stamped center Grand National rear end housings are brand new and feature Grand National snouts with a centered pinion. They come in your choice of 58", 60", or 62" widths and are IMCA approved for racing. Brand new stamped steel center housing 3" O.D., .188" wall DOM tubes Grand National snouts Available in 58, 60, 62" widths Centered pinion IMCA approved
High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle. Anodized billet aluminum A must for cambered rear ends For 9" Ford Grand National and ...
Winters Grand National full floating Ford 9 inch rear end housing.
Winters Grand National replacement full floating Ford 9 inch rear end housing. Part # 655-4800 features two 30" tubes and the pinion is centered. Part # 655-4803 features has a driver side tube at 31-1/2" in length and pass. side is 30-1/2" in length. Pinion is offset 1/2" to RH side.