T-bolts just like the originals! If you have ever put a Mustang II front end under a street rod you know how hard it is to find these bolts. Designed just like the originals to fit through the slot the upper control arm mount mounts to. A quarter turn and its in place. Set of four with nuts.
T-bolts just like the originals! If you have ever put a Mustang II front end under a street rod, you know how hard it is to find these bolts. Designed just like the originals to fit through the slot the upper control arm mount mounts to. A quarter turn and its in place. Set of four with nuts.
Manufactured with the highest quality castings, bearings, and gears these rearend parts have proven reliability. Bolt For Shifter Arm
Manufactured with the highest quality castings bearings and gears these rearend parts have proven reliability.Bolt For Shifter Arm
These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel. Fine thread Titanium Greater tensile strength than Grade 8 bolts 3 times the strength of aluminum 42% lighter than steel 1/2"-20 x 2.050" 3/4" Hex Head Application: pitman arm / shock bolt 2-1/4"
These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel. Fine thread Titanium Greater tensile strength than Grade 8 bolts 3 times the strength of aluminum 42% lighter than steel 1/2"-20 x 1-3/4" 3/4" Hex Head Application: Right Front steering arm to spindle
These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel. Fine thread Titanium Greater tensile strength than Grade 8 bolts 3 times the strength of aluminum 42% lighter than steel 1/2"-20 x 2" 3/4" Hex Head Application: tie rod steering arm
These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.Fine thread TitaniumGreater tensile strength than Grade 8 bolts3 times the strength of aluminum42% lighter than steel1/2"-20 x 1-3/4"3/4" Hex HeadApplication: Right Front steering arm to spindle
These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.Fine thread TitaniumGreater tensile strength than Grade 8 bolts3 times the strength of aluminum42% lighter than steel1/2"-20 x 2"3/4" Hex HeadApplication: tie rod steering arm
This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles. Kit features:9-1/4" brake rotor 5 x 4-3/4" wheel bolt patternRemanufactured Pinto/Mustang iron calipers 7/16"-24 inlet16" rubber brake lines Zinc plated dust capsAll necessary brackets adapters bearings seals hardware and instructions included Note: Will not work with traditional style steering (no room for upper steering arm).Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. ...