Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline

SAME DAY SHIPPING! Order within the next 11 hours and receive same day shipping

Specs
Sold in Quantity:
Set
Spline Count:
30
Garage Sale:
No
Outside Diameter:
8.50
GM 10 Bolt Ring and Pinion Instal Kit, 8.5 R&P, 30 Spline

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Everything you need for a complete ring and pinion installation job.

Kit Includes:

  • cover gasket
  • crush sleeve
  • marking compound and brush
  • pinion and carrier bearings
  • pinion nut and washer
  • pinion seal
  • thread locking compound
  • sealer

Note: Pinion-depth shims are not included. 

Item Details

30 Spline Pinion

Customer Reviews

Rated 2 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

Steve
Illinois

Gets the job done

August 20, 2012
Not a good kit if you want everything you need to install a new ring and pinion. If you don't mind buying carrier shims separately and have a few large impact sockets to chose from this is a decent kit.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

DVD - Richmond Gear Installation Instruction
(Part #2379334)
                        Shows you how to properly install ring and pinion gear sets. Packed with information for correct installation procedures. 
                    
Cross Pin GM 10 Bolt 8 1/2 Inch Ring & Pinion
(Part #919800272)
                        Special 4130 Chromoly cross pin required for ratios of 5.38 or higher. 
                    
Lubrication Engineers SAE 90 Weight Gear Oil, 1 Gallon
(Part #91044090)
                        Whether you're running a stock flattie and rearend or hopped-up overhead and quick change, you need to run a good gear lube. Remember that your rearend was designed fifty plus years ago and needs all the help it can get. 

The biggest improvement you can give it is a lubricant that will allow the gears to survive the highway speeds that cars see today. L.E. gear oil is what we use in our 350 mph streamliner, that uses a V-8 quick change, without failure. The "red stuff" provides superior lubrication for long gear life. You can't win if you don't finish. We suggest 90 weight for the street and 140 weight for extreme uses.

  • Formulated using blends of high quality paraffinic and synthetic base fluids
  • Contains a highly shear stable tackiness
  • Unique blend of base fluids and thermally stable EP additives
  • Separates readily from water
  • Contains non-silicone defoaming additives
  • Contains no solids
  • Contains DUOLEC LE's proprietary dual acting liquid wear-reducing and extreme pressure additive
LE Gear Oil Performance Data Sheet (PDF)

LE Gear Oil Safety Data Sheet  (PDF)

Red Line 58204 Heavy Shockproof Synthetic Gear Oil, 1 Quart
(Part #60720100)
                        

Red Line Shockproof synthetic gear oil is designed for heavily loaded racing and street differentials that see heavy shock loading. It contains a unique solid dispersant that cushions gear teeth to help prevent breakage. Red Line Shockproof gear oil provides the protection of a 75W250 with the fluid thickness properties of a 75W90.

Ideal for use in sprint, midget, and dirt late model differentials as well as in rear ends using spools or lockers.

  • Fully-synthetic gear oil formula created from polyol ester base stocks offers excellent lubrication under extreme conditions
  • High viscosity-index to provide relatively constant viscosity and film thickness with varying temperature change
  • Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
  • Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oil
  • Exceed API GL-5 specifications
  • Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
  • Not recommended for most synchro applications due to the product's extreme slipperiness
Red Line 58205 Heavy Shockproof Synthetic Gear Oil, 1 Gallon
(Part #60720120)
                        

Red Line Oil's team of chemists formulate fully-synthetic engine oils using only the world's finest base stocks. It's not designed to be the cheapest – it's built to be the best. The world's top racing team and most discriminating enthusiasts use Red Line Motor Oil products exclusively.

Red Line Shock Proof gear oil is designed for heavily loaded racing and street differentials that see heavy shock loading. It contains a unique solid dispersant that cushions gear teeth to help prevent breakage. Red Line Shock Proof provides the protection of a 75W250 with the fluid thickness properties of a 75W90.

Ideal for use in sprint, midget, and dirt late model differentials as well as in rear ends using spools or lockers.

1970-76 GM 10-Bolt Mini Spool
(Part #91048601)
                        Works on 70-76 GM 10-bolt rearends with 8.5" ring gear and 28-spline axles. Economical way for all race cars to "lock" the rearend. Will not work in posi rearends.

910-48601 Instructions (PDF)

Item Details

8.5" ring gear, 28 spline
1970-96 GM 10 Bolt 8 1/2 Inch Ring and Pinion, 8.5 R&P
(Part #91910)
                        

Many 8.5 Inch ring and pinion ratios to choose from.

  • 8.50" diameter ring gear
  • 1.625" diameter pinion
  • 10 ring gear bolts
  • 10 cover bolts
  • 30 pinion splines
  • Uses LH thread ring gear bolts - 7/16"-20
  • 8.5 R&P

Note: When replacing a stock 2.56 (or numerically lower) ratio 8.5 Inch Ring and Pinion, the carrier must also be replaced with a 2.73 or higher ratio's carrier to compensate for the difference in ring gear thickness.

GM 8.5 Inch 10-Bolt Steel Full Spool, 28-Spline
(Part #91048528)
                        This  is a steel full spool made from 4130 aircraft alloy heat treated steel.
                    
GM 8.5 Inch 10-Bolt Steel Full Spool, 30-Spline
(Part #91048530)
                        This  is a steel full spool made from 4130 aircraft alloy heat treated steel.