No items in Shopping Cart
This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a raised fill neck w/ cap, AN-6 fuel pickup, and a rollover vent. Designed to be mounted to the left side which leaves room for your battery. Has a 10.4 gallon capacity.
Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the neck.Includes cap, chain, neck, gasket, and all hardware.Polyethylene cap is vented.Hole in tank needs to be 3-3/4" for cap to sit flush.
The tank comes with a plug for the drain hole at the bottom, and a gasket and mounting screws for the sending unit (the flange for the sending unit has at least three, 5-and 6-screw patterns in it to accommodate nearly any original early Ford or aftermarket sending unit).The fuel line attachment port is on the front of the tank (with a tube that reaches to the bottom/center of the tank) and is threaded 1/2 -20. It has a flat seat at the bottom of this threaded hole, not a tapered ...
This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as distributors, and other delicate components.Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket.
This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity.
To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800. This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.
New 26 gallon fuel cell features a 20 gauge steel can with a tough cross-linked polyethylene cell inside. Includes fuel cell, steel can, tip over valve and a twist on cap. Tank is 25" x 17" x 17". Available in Red, White or Black.