No items in Shopping Cart
This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet.
Compact design offers weight savings over full size filter. Comes with stainless steel high-flow element. Can be cleaned and reused. Purple anodized aluminum housing.NOT compatible with ethanol (E85).
91011771Overall Length2.413"Inside Diameter0.675"Outside Diameter2.171"Material TypePaperSold in QuantityEachNotesReplacement filter includes o-ring for the housing.
Jet/Speedway Fuel System (IMCA)Kit includes:Steel 22 Gallon Fuel CellUniver Filter Mount BracketPaper Fuel Filter ElementLong Filter Housing w/ HardwareInlet Long & Short/Outlet Long AN8 FittingBlue AN8 Aeroquip HoseStraight Brass Push-on Fitting, AN890 Push-on Hose End, AN8
New design allows secure mounting on any type of tubing - CNC machined aluminum, purple anodized. Fits both round and square frame tubing. Designed for our fuel filters with 2" O.D. housing.
These 3/8" fuel line kits have a clean look and are easy to install. Choose with or without fuel filter. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an ...
These Tornado gas saving devices are for carbureted and throttle body injected engines and increase miles per gallon and improve fuel economy. The Tornado installs easily on your air cleaner or air inlet hose and its unique airflow dynamics create a swirling, fast-burn effect in the combustion chamber. This creates finer particles (atomized fuel) allowing better flame propagation and more complete combustion, resulting in gas mileage increases averaging 1 to 2 MPG. These figures are confirmed by road testing performed at an EPA-licensed emissions lab. To select the correct Tornado ...
Paper element to fit our 2" x 10" aluminum filter bodies.
Replacement 10" stainless filter elements to fit our 2" filter bodies. 45 micron. Designed for race car use only. Compatible with methanol and gasoline. NOT compatible with ethanol (E85).
Stainless steel filter elements to fit our 2" x 6" aluminum filter bodies. Designed for race car use only.Compatible with both methanol and gasoline. NOT compatible with ethanol (E85).
Choose AN inlet/outlet sizes needed: AN6, AN8, AN10, AN12.
AFCO In-line fuel filter are available with either paper or stainless steel filter elements. The paper element is compatable with most racing gas products, but should not be used with alcohol. Paper elements are so efficient in separating water from fuel that "icing" or blockage can occur with alcohol. Stainless elements should be used with alcohol.
The modern fuel injected engine requires a much finer fuel filter to protect the injectors. This is made of a high impact plastic or steel. This is a 10 micron fuel filter and is rated up to 60PSI, flows up to 120 gph and is a necessity for any EFI conversion. It includes an AN 6 inlet and outlet. Mounting bracket included.
Compact, chrome steel fuel filter. Can be unassembled for easy cleaning. Features a sintered metal filter.
Pleated stainless steel element. Slip your pick-up hose over the 3/4" inlet and secure with a clamp. 60 micron, 90 filter.Center of tube to tip is 6.25", and it connects to AN12 hose.
A small, lightweight, in-line fuel filter that weighs under 7 ounces. It will handle flows through Hilborn's #1 size fuel pump. The stainless steel element can be cleaned and never needs replacement. 149 micron for mechanical injection applications.
This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Paper elements are for gasoline only. Stainless Steel elements work with both alcohol and gasoline.
These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.
91011773Overall Length2.400"Outside Diameter1.500" (1 1/2")Thread Pitch3/8" NPTFlow Rating160 GPH at 7 PSIMaterial TypeAluminumFinishNaturalSold in QuantityEachNotesFilters down to 35 microns, screen can be cleaned in solvent and re-used.
91011772MFG. Part #10215Overall Length3.000"Overall Height2.450"Outside Diameter2.000"Centerline of Holes1.500" (1 1/2")Inlet Size0.380"Outlet Size0.380"Thread Pitch3/8" NPTFlow Rating160 GPH @ 7 PSIMaterial TypeAluminumFinishPolishedSold in QuantityEachNotesIntended for "carbureted" systems only. Features (2) cleanable/reusable S.S. screen filters (one coarse pre-filter and one fine 10 microns screen).
This aluminum fuel block has two ports, a 1/4" NPT inlet and a 1/4" NPT outlet. It also has a screw hole to allow it to be mounted anywhere. Use it as a junction point, a fuel filter mount, etc.
Replacement filter element for fuel filters 91011530, 6174506 and 6174512.
Replacementspring for Speedway 6" and 10" fuel filters. Compatible with bothmethanol and gasoline. Works with stainless and paper filter elements.
NOTE: Springs and filter elements shown for assembly reference only. O-rings are sold EACH.