Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Front Hairpin Radius Rods, 27 Inch, Chrome Steel

SAME DAY SHIPPING! Order within the next 7 hours 50 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Pair
Finish:
Chrome
Thread Pitch:
.625
Garage Sale:
No
Overall Length:
27.00
Tube O.D.:
.875
Center to Center:
4.50
Front Hairpin Radius Rods, 27 Inch, Chrome Steel

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. chrome plated steel tubing is threaded 5/8"-18 NF right hand at each end.

Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

RRAMSEY
Verified Purchaser
SPRINGFIELD, MO

I WOULD BUY THIS PRODUCT AGAIN

April 30, 2012
THIS PART FIT MY 23 FOR T-BUCKET PERFECT THERE WAS NO BLEMISHES AT ALL. ALL THE THREADS WAS PERFECT A VERY GREAT ADD ON TO MAKING MY BUCKET SHOW QUALITY.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

is this part number for ! rod or is it 1 set of two rods ?

av8ter
huricane wv
April 22, 2011

is this part number for ! rod or is it 1 set of two rods ?

Answers

April 25, 2011
Tech Support
This is for a pair of rods. (2)
Page 1 of 1

You may also be interested in:

Front Hairpin Radius Rods, 27 Inch, Plain Steel
(Part #91635023)
                        

These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. steel tubing is threaded 5/8"-18 NF right hand at each end.

Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

Front Hairpin Radius Rods, 27 Inch, Polished Stainless
(Part #91635020)
                        

These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. polished stainless steel tubing is threaded 5/8"-18 NF right hand at each end.

Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

Front Hairpin Radius Rods, 27 Inch, Unpolished Stainless
(Part #91635021)
                        

These front radius rods are ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. brushed stainless steel tubing is threaded 5/8"-18 NF right hand at each end.

Designed to be used with batwings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end hardware.

Standard Clevis, 5/8 Inch RH, 3/8 Inch Slot, Chrome
(Part #91002016)
                        

A beautiful clevis ideal for your Hot Rods' suspension!

The shank features 5/8" RH fine threads. 3/8" slot, 3/8" hole.

Chrome Steel Jam Nut, 5/8 Inch-18 RH NF Fine Thread
(Part #91001006)
                        

If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with right hand threads.

These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

  • 5/8 Inch-18 RH NF Fine Thread
  • Available in right hand thread.

Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.