No items in Shopping Cart
Made of heavy duty fiberglass. Features a glossy gelcoat finishthat isready for paint preparations.
Quality fiberglass reproduction rear fenders for your 1928-1929 Ford Model A coupe, roadster, or pickup. Stock width of 11-1/2". Fender width is measured at the top of fender arch, from mounting flange to outermost edge.
Made of heavy duty fiberglass. Features a glossy gelcoat finish that isready for paint preparations.
Anytime you remove a leaf spring U-bolt, youshould replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2-1/4" widerearFord half-ton multi-leaf springs.
Anytime you remove a leaf spring U-bolt, youshould replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock2-1/4" widerearFord half-ton multi-leaf springs.
Rear 1932 Ford straight cross bars. The rear bars measures 39-1/2" wide and have a 2" outer diameter. 1/2" holes, no bolts or spacers included.Spacers are already on an original frame. If you have an aftermarket frame, you will need spacer kit 916-57028.
These shackles fit 2-1/4" wide spring with 3/" I.D. eyes. It has a greater reach than the standard shackles.
Mounts a late model rear into a T-1931 Ford chassis when using a high-arch 2-1/4" wide spring (like 910-43102). Locates spring directly above the axle housing. Includes zinc plated shackles with nylon bushings, weld-on brackets, and instructions.
Quality fiberglass reproduction rear fenders for your 1928-1929 Ford Model A Touring, Sedan, or Panel. We offer either a stock width 7" wide fender or an extra wide10" fender. Specify left (driver) or right (passenger) side.
These 13-3/4" wide fiberglass fenders are modeled after the '22 Ford Model T fender and come with a smooth gelcoat finish. Attaches to spindle/backing plate brackets that you provide.
These 10" wide fiberglass fenders are modeled after the '22 Ford Model T fender and come with a smooth gelcoat finish. Attaches to spindle/backing plate brackets that you provide.
Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Sedan and Touring Car. Has the same 7-1/2" wide dimensions as a stock 'T' fender.
We offer these rear drum brake kits for thepopular 9" Ford rear axle. Each kit has new 11" drums, 2-1/4" wide brake shoes, backing plates, wheel cylinders, springs, emergency arm and hardware. Fits Old stylebig Ford housings with2-3/8" axle offset and3.15" axle bearing.
Fits 1933-34 Ford passenger cars. A perfect replacement for your missing, butchered up, or hole-filled original. Bare steel. This firewall has a 3/4" flange on the sides and top under the cowl area. This is a smoothie firewall and not the OEM replacement that had large rolled beads in a V pattern. The very upper section under the cowl has three small beads rolled into it horizontally. From the sides, towards the center 4-1/2" there is a corner at approximately 30 degrees and turns rearward 3". The flat area at ...