Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2-1/4" wide rear Ford half-ton multi-leaf springs. 3" center to center mounting 8-5/8" overall length and 8" inside 2-3/8" inside width for 2-1/4" spring Bolts have 9/16" rolled threads and include flat washers and nylock nuts.
These stainless bolts/hardware are for 1928-1931 Model A Ford headlight bars. They come as a set of four bolts, washers, and nuts, to fasten one complete bar. Stainless steel Set of four bolts, washers, and nuts
Main bolt w/ oil pump pickup stud for the 2.3L Ford oil system.
Headlight bar bolt for 1932 Ford. Measures 1.700" from shoulder to the end of the threads. Thread length is 1.185". Sold each.
Harmonic balancer bolt and washer fit the Small Block Ford V8 302-351W and has a 12 point head. 170,000 PSI strength Thick, 1/4" washer
Designed for stock, original 1935-1940 Ford frames. Made of 1-1/2" O.D., .095" wall steel tubing. Includes bolt-in boxing plates, drop-out transmisson mount, brake pedal and booster/master cylinder mount and hardware Bolt-in brake pedal kit sold separately. 91063540 Instructions (PDF)
Designed for stock original 1935-1940 Ford frames. Made of 1-1/2" O.D. .095" wall steel tubing. Includes bolt-in boxing plates drop-out transmisson mount brake pedal and booster/master cylinder mount and hardwareBolt-in brake pedal kit sold separately.91063540 Instructions (PDF)
Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly. ARP High Performance series rod bolts are forged from 8740 chromoly steel. They feature rolled threads and large cold-formed fillets in the head-to-shank area for increased strength. Up to 5x stronger than stock bolts 200,000 psi tensile strength Black oxide finish Complete set for 8 rods
Headlight bar bolt for 1932 Ford. Measures 1.700" from shoulder to the end of the threads. Thread length is 1.185".Sold each.
Harmonic balancer bolt and washer fit the Small Block Ford V8 302-351W and has a 12 point head.170 000 PSI strengthThick 1/4" washer
Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.
Unquestionably the most important fasteners in any engine are the connecting rod bolts, as they hold the key to the entire rotating assembly. ARP High Performance series rod bolts are forged from 8740 chromoly steel. They feature rolled threads and large cold-formed fillets in the head-to-shank area for increased strength. Up to 5x stronger than stock bolts 200,000 psi tensile strength Black oxide finish Complete set for 8 rods Note: Also fits Boss 302.
ARP High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. Bolts are rated to 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers. Fits 289-302 with factory heads or Edelbrock heads 60259 & 60379.
ARP High Performance head bolts are available with a reduced wrenching hex and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing.Bolts are rated to180 000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers. Fits 289-302 with factory heads or Edelbrock heads 60259 & 60379.
Unquestionably the most important fasteners in any engine are the connecting rod bolts as they hold the key to the entire rotating assembly. ARP High Performance series rod bolts are forged from 8740 chromoly steel. They feature rolled threads andlarge cold-formed fillets inthehead-to-shank area for increased strength. Up to 5x stronger than stock bolts200 000 psi tensile strengthBlack oxide finishComplete set for 8 rods
Unquestionably the most important fasteners in any engine are the connecting rod bolts as they hold the key to the entire rotating assembly. ARP High Performance series rod bolts are forged from 8740 chromoly steel. They feature rolled threads and large cold-formed fillets in the head-to-shank area for increased strength. Up to 5x stronger than stock bolts 200 000 psi tensile strength Black oxide finish Complete set for 8 rodsNote: Also fits Boss 302.
Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2" wide front Ford half-ton multi-leaf springs. Bolts have 9/16" rolled threads and include flat washers and nylock nuts.
Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock front Ford half-ton multi-leaf springs. Bolts have 9/16" rolled threads and include flat washers and nylock nuts.
We offer these stainless steel bolt kits for the Ford 94 series carbs. Includes most external screws needed to dress up your carb less the mounting stud kit. (Order separately, studs are not stainless steel.)
These stainless bolts/hardware are for 1928-1931 Model A Ford headlight bars. They come as a set of four bolts washers and nuts to fasten one complete bar.Stainless steelSet of four bolts washers and nuts
Arp head bolts for after market Ford aluminum heads like the FloTech. These 1/2" - 7/16" stepped bolts feature a 12 point head and are intended to fit Small Block Ford 302 applications with 351 Windsor cylinder heads. All Pro Series bolts are cold-forged to ensure molecular integrity heat-treated prior to thread rolling and machining and are rated nominally at 200 000 psi. ARP Pro Series head bolt kits are application specific - designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP ...
Ring gear bolts for 9" Ford. Pack of ten.
This Small BlockFord balancer features billet steel forgings a durable elastomer bond. The 50 oz. balance factor iscommon to 1981-95 302.Has a 4-bolt pulleyhub. Has aanodized black finish.
Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2-1/4" wide rear Ford half-ton multi-leaf springs. Bolts have 9/16" rolled threads and include flat washers and nylock nuts.