Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake

Specs
Sold in Quantity:
Kit
Bolt Pattern:
5 on 4.5"
Rotor Diameter:
11.75
Caliper Pistons:
Single
MFG. Part #:
M-2300-G2
Rotor Thickness:
.75
Caliper Finish:
Zinc
Parking Brake Provision:
Yes
Rotor I.D.:
2.78
Rotor Construction:
Vented
Garage Sale:
Yes
Rotor Location:
Rear
Rotor Shape:
Round
Drilled:
No
Slotted:
No
Notes
Includes rotors, calipers, backing plates, caliper brackets, hardware,and brake pads.
Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake
Garage Sale - Ford Racing Rear Disc Kit w/ E-Brake

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Looking for a low cost way to add rear disc brakes to your Ford  8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.

Kit is designed for the late model Ford 8.8" truck and 9" (New Style Big Ford housing with 3.15 bearings, 2.5" offset) rear axles. Will NOT work with Mustang 8.8" axle.

Rotors are drilled for 5 on 4-1/2" bolt pattern. See Notes tab for important install info.

Will Not Work On 15" or 16" Wheels.

Axle Flange ID Chart

 

Clearance!

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Notes

  1. Wheel spacers not recommended for use with brake kit.
  2. Does NOT fit Mustang 8.8" axle.
  3. Due to large 11.8" diameter rotor and floating caliper design, most production and aftermarket 15" wheels will NOT fit.

Specs

  • 5 x 4.5" diameter passenger car bolt pattern with 2.780" center hub
  • Fits housings with:
    • 2" x 3.56" housing flange bolt pattern
    • Big 3.15" diameter bearing
    • 2.5" brake gap offset (housing flange-to-axle shaft flange)

Item Details

Use with 17" or larger wheels.

You may also be interested in:

Lokar EC-81FU Floor Mount E-Brake Cables for Wilwood & Ford Explorer
(Part #49181FU)
                        

Cables are designed for use with Lokar Floor Mount Emergency Hand Brake (at right). Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

See Application tab for model-specific information.

Note: Cable kit includes Explorer-style clevis 491-81FC.

Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
(Part #4917000)
                        

This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

Lokar EHB-7011 Trans Mount Emergency Hand Brake, 11 Inch
(Part #4917011)
                        

Transmission mount emergency hand brake lever assembly. Ratchet cut gear plate and lock are heat treated for strength and safety. Lever's geometric design allows for comfortable leverage operation. E brake handle mounts to your Lokar shifter.

Note: 11" Hand brake is suggested to be used with 16" and shorter shifters.  Use 16" hand brake with 23" and taller shifters.

The tailmount, floor mount and cable operated transmission shifters do not offer the capability of mounting the transmount hand brake assemblies.  For these type of transmission shifters, the floor mounted hand brake assembly should be utilized.

 

Lokar EC-80TU Trans Mount Emergency Brake Cables
(Part #49180TU)
                        

Transmount E-Brake Cables are designed for use with Transmount Emergency Hand Brakes (at right) and includes bracket for mounting cables to hand brake. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless steel inner cable resists moisture.

Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit”­.

*NOTE*: If using these cables with Ford Explorer-style (such as our 910-31938), Wilwood, or late model Corvette rear disc brakes with internal shoe-type emergency brake, you will need our nut kit listed 916-41021 and E-Brake clevis 491-81FC (at right).

Lokar EC-81FC E-Brake Clevis for Ford Explorer & Wilwood
(Part #49181FC)
                        

Lokar Clevis Kits adapt Lokar Emergency Brake Cable kits to Ford Explorer and Wilwood Explorer-style rear disc brakes with internal drum hubs (like our 910-31938). Also works with late Corvette rear disc brakes with internal shoe-type parking brake (requires some file-fitting).

Note: Clevis is included in kit 491-81FU. Ford Explorer rear disc brakes will need a pair of 916-41021 nuts to secure the cable ends to the thick cast iron OEM brackets.

  • Wilwood/Ford Explorer Style Rear Clevis Kit