Gilmer or cog belts are the tried and true belts used to drive dry sump oil pumps and other engine accessories.
Power steering pump pulley for use with short-style (1955-68)water pumps. Available in plain billetonly.For use with our 91032908 power steering pumpUse with 2-groove lower crank pulley when using P/S bracket 91667920Pulley runs off outer groove of lower crank pulley5/8"shafthole w/ key way
These power steering pump pulleys for a long water pump are available in plain(Pln) polished(Pol) or chrome(Chr). Pulley listed is 5-3/4" in diameter.Works only with the long pump and matching long pump pulleysWorks with our Saginaw pump (91032908)Bolt-on pulley 5-3/4" in diameterMeasures .852" from the front of the pulley to the center of the V-belt groove just as it would be mounted on the pumpChoose from plain polished or chome finish.
Replacement 4.2" diameterserpentine beltpulley for KRC AluminumPower Steering Pumps.Serpentine Pulley Offset (PDF)
AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems. We dyno-test each pump to ensure its quality. Correct pressure (6AN) & return (10AN) fittings installed 100% pressure-tested Plated Body Lightweight pulley design Popular racing design Available in 1100# pressure
These KRC V-belt pulleys are designed to work with a cast iron power steering pump. They are replacement 6" diameter V-belt pulleys.Replacement V-belt pulley For KRC Cast Iron Power Steering Pumps6" diameterV-belt styleV-Belt Pulley Offset(PDF)
Replacement 4.2" diameterserpentine pulley for KRC Cast Iron Power Steering Pumps.Serpentine Pulley Offset (PDF)
AFCO Power Steering Pump Replacement 6 Inch V-Pulley OnlyLightweight pulley design
Replacement 4.2" diameter serpentine pulley for KRC Cast Iron Power Steering Pumps. Serpentine Pulley Offset (PDF)
Single groove aluminum V-belt pulley withSpeedway name on itand gray anodized finish. Has a 6" diameter andpress-fits onto a 0.663" diameter shaft. Fitspower steering pumps #:910-32906910-32902910-32903
HTD (High Torque Drive) pulleys offer deeper tooth engagement making them capable of carrying more load. This pulley is excellent for severe conditions.
Attached Billet aluminum reservoirSerpentine PulleyReservoir available separately but for KRC pump onlyHas AN 6 inlet and outlet
Replacement 4.2" diameter serpentine belt pulley for KRC Aluminum Power Steering Pumps. Serpentine Pulley Offset (PDF)
These KRC serpentine pulleys are designed to work with a cast iron power steering pump. They are replacement 6" diameter, 6 rib pulleys. Replacement serpentine pulley For KRC Cast Iron Power Steering Pumps 6" diameter 6 Rib style Serpentine Pulley Offset (PDF)
Polished aluminum V-belt pulley for use with Low Flow &High Flow GM Type II TC steering pumps:Low Flow Power Steering Pump for Mustang II & FordGM & Ford Power Steering Pump with ReservoirHigh Flow Power Steering Pump for T-Bird & GM
Power steering pump pulley for use with short-style (1955-68) water pumps. Available in plain billet only. For use with our 91032908 power steering pump Use with 2-groove lower crank pulley when using P/S bracket 91667920 Pulley runs off outer groove of lower crank pulley 5/8" shaft hole w/ key way
The KRC Pro Series power steering pump is the first pump specifically designed and engineered for racing without any production car components is the result of 2 years of research and development that included input from industry leaders like Tony Woodward. The pump marries KRC signature components such as tunable flow valves spline drive bolt-on pulleys double bolt patterns and ball and roller shaft bearings with new and improved pump technologies such as a micro-honed piston bore for quick and smooth response and ported low turbulence internal passages and a ...
These KRC V-belt pulleys are designed to work with a cast iron power steering pump. They are replacement 6" diameter, V-belt pulleys. Replacement V-belt pulley For KRC Cast Iron Power Steering Pumps 6" diameter V-belt style V-Belt Pulley Offset (PDF)
These power steering pump pulleys for a long water pump are available in plain(Pln), polished(Pol), or chrome(Chr). Pulley listed is 5-3/4" in diameter. Works only with the long pump and matching long pump pulleys Works with our Saginaw pump (91032908) Bolt-on pulley 5-3/4" in diameter Measures .852" from the front of the pulley to the center of the V-belt groove just as it would be mounted on the pump Choose from plain, polished, or chome finish.
Replacement 6" diameter V-belt pulley for KRC Cast Iron Power Steering Pumps. V-Belt Pulley Offset (PDF)
Replacement 6" diameter V-belt pulley for KRC Aluminum Power Steering Pumps. V-Belt Pulley Offset (PDF)
AFCO Power Steering Pump Replacement 6 Inch V-Pulley Only Lightweight pulley design