Odds are the king pins on your old '57-'64 half-ton Ford truck are shot. These new king pin sets include the parts you need to tighten your truck up again. Honing of the bushings is required by a machine shop in your town. 910-32128 Instructions (PDF)
These new multi-leaf rear springs by Posies lower your classic Ford half-ton pickup 3" more than a set of stock replacement springs. Super Slide springs incorporate moly-nylon buttons that reside in die-formed pockets at the tips of the spring leave. Replace your 50 year old stock springs with these new, computer-designed leaf springs for a much smoother ride. Springs have reduced load capacity from stock just from the fact that you are lowering your vehicle. Factory spec spring eye bushings come with springs. Shackles, shackle bolts and U-bolts sold separately.
After more than fifty years of use, the original upper shock mounts on the front of your vintage Ford pickup are likely worn out, damaged or missing. These forged steel upper shock mounts are reproductions of those used on 1948-1952 Ford F1 trucks, but are also adaptable to other beam-axle trucks from the 1940's and 1950's. Forged from the finest steel, these zinc-plated mounts are 6-1/2" long (measured from the centerline of the stud to the center of the top bolt hole) and accept shocks with 5/8" I.D. bushings. Hardware is included. ...