No items in Shopping Cart
Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.
Bolt a non-boosted master cylinder to your 1935-1940 Ford car and 1/2 ton pickup frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female. Kit includes master cylinder, pedal assembly and hardware.
Bolt a non-boosted master cylinder to your 1941-1948 Ford passenger car frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female. Kit includes master cylinder, pedal assembly and hardware.
The ideal combination for a clean and simple 1933-1934 Ford. The master cylinder has been remanufactured and is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.
This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a reproduction Early Ford frame or one without it's originalcrossmember.Bracket bolts to frame (slight trimming may be required).Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have.Round pedal pad screws onto pedal to finish the installation.
This crossmember kit gives you over 1" added clearance in the critical tunnel area. Also this added room allows for easier master cylinder and pedal mounting. Stronger and easier to install than the round tubing style. Constructed of 1" x 1-12" .120 wall tubing. Welding required. TH 350.
Designed for stock, original 1935-1940 Ford frames. Made of 1-1/2" O.D., .095" wall steel tubing. Includes bolt-in boxing plates, drop-out transmisson mount, brake pedal and booster/master cylinder mount and hardware
Thiscombo pairsa Wilwoodfloor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.6.25 to 1 pedal ratio. Master cylindershavesingle1/8" NPT outlets.
This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.
This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (atright)for quick on-track adjustments.
This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.
Thiscombo pairsa Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cablefor quick on-track adjustments.
This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.
Small Speedway master cylinder for clutch applications.
If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment.
Brake fluidcan ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. The sleeve itself will cost you over $90 to have installed by other shops.
The ideal combination for a clean and simple 1935-1940 Ford. Bracket mounts the master cylinder under the floor onto the X-member. The bracket can be bolted or welded to theX-member (boxed or stock). The included1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.