No items in Shopping Cart
Hoop style steering arm features boss for 7 tapered tie rod end, butcan be drilled for 5/8" rod end.Available for 1937-48 Ford car spindle applications.
Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. Uses Ford bolt pattern 5 on 4-1/2".
Easily installs 11" rotors and the 1978-88 GM Metric calipers to your 1937-48 Ford passenger car spindles withno machine work needed. This kit works well with bolt-on steering arms.
Easily installs 11" rotors and the1969-77 GMmidsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. UsesChevy bolt pattern 5 on 4-3/4".
Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting, install corrosion resistant stainless steel sleeves with news pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.
Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting andinstall corrosion resistant stainless steel sleeves with news pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.
Kit allows you to install 1953-1956 Ford F-100 11"x 2" drum brakes on your 1937-1948 Ford car spindles. Kit includes new bearings and seals to allow conversion.
Each Ford closed car outside mirror has a hinge pin mount, 4" diameter, 8" long. Choose left or right. Adjustable.
Replace your stock rear crossmember with this tubular version. It welds in using the original location and includes a Panhard bar and mount. You will have to weld the Panhard mount to your rear axle. Can be used with shocks or coil-overs.
Each Ford closed car outside mirror has a hinge pin mount, 4" diameter, 8" long. Adjustable.
Two-piece, stock height, with left side mount mirror hole. Two standard chrome wingnuts included.
The tank comes with a plug for the drain hole at the bottom, and a gasket and mounting screws for the sending unit (the flange for the sending unit has at least three, 5-and 6-screw patterns in it to accommodate nearly any original early Ford or aftermarket sending unit).The fuel line attachment port is on the front of the tank (with a tube that reaches to the bottom/center of the tank) and is threaded 1/2 -20. It has a flat seat at the bottom of this threaded hole, not a tapered ...
2 Gallon added capacityAll new steel reproduction tanksIncludes: Original-style extra-length mounting straps & hardware, sending unit gasket, and fuel injecion block-off plate & gasketComes with flange for fuel injection pickup or use fuel line outlet for carbAccepts original or other after market sending units from Stewart Warner, VDO, Classic and others
This stainless steel hubcap fits stock wheels for a 1941 Ford car.
This stainless steel hubcap fits stock wheels for 1949-1950 Ford car.
For production chassis. Exits under car on Pinto or Mustang IIHigh velocity 1-5/8" to 1-3/4" stepped primary with 3" collectorIncludes gaskets and header bolts
Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model Aand '32-'34 Fordframes. I-Beam axles require'37-'48Ford passenger car spindles. Kits are available in plain steel.
Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model Aand '32-'34 Fordframes. I-Beam axles require'37-'48Ford passenger car spindles. Kits are available in Plain steelor Chrome.