No items in Shopping Cart
If you have access to your own transmission and parts or you wish to adapt an AOD or C4/C6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission.
Adapt GM/Chevy T-5 transmission to 1932-48 Ford or 1939-50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.
Adapt a GM/Chevy T-5 transmission to '32-'48 Ford or '39-'50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.
Adapt your 1949-1953 Ford Flathead V8 engine to a modern Ford automatic transmission. This complete transmission conversion kit is an excellent upgrade for early Ford drivetrains - the lightweight flexplate and torque converter does wonders for a Flathead's throttle response and stop-and-go driving. This kit includes Speedway's Street King Ford transmission completely remanufactured with heavy duty clutches, special shift kit, torque converter, engine adapter, special flexplate, modified 12-volt starter, hardware, and instructions.
Adapts a standard Chevy 3 or 4 speed manual transmission to 1932-48 Ford or 1939-50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.
Adapt standard Chevy 3 or 4 speed manual transmission to '32-'48 Ford or '39-'50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.
Upgrading your Flathead's valve train is the surest way to maintain performance and keep that old Ford V8 happy on modern fuel. Our adjustable lifters are the preferred way to maintain critical valve train tolerances while avoiding the hassle of grinding your valve seats for clearance. Simply set your valve lash using the adjustable set screw.
When you spend big bucks rebuilding and modifying a vintage Flathead V8, you don't want to take chances on its oiling system. The longer gears on our high-volume oil pump give it 25-percent greater flow, ensuring that your high-performance Flathead gets the lubrication it needs. The HV pump may require oil pan modifications (see Notes tab for details).
A Speedway Motors exclusive! The center exhaust ports on Flatheads are siamesed. Our baffles separate these two exhaust ports and prevent reversion while decreasing the dilution of the intake charge. These are a must for high-performance Flatheads.
Get more performance and driveability out of your Ford Flathead V8 by hooking it up to a GM manual transmission! This adapter allows you to easily install a GM 3-, 4-, or even 5-speed transmission behind your 1932-1948 Ford or 1939-1950 Mercury Flathead V8 engine.
Powermaster XS Torque gear reduction starters are built using all new components and cranks out 200 ft./lbs. of torque. It bolts up like an original starter, but its gear-reduction design gives it more power to crank over high-compression engines. Fits USA-made 1932-1953 flathead Ford V8 engines using manual transmissions & steel flywheels.
For 1932-1953 early & late Flathead V8 engines. Weighs 12 lbs. For use with "Long" style pressure plate (10.5" or 11" diameter) or "Diaphragm/Borg Beck" style pressure plate (10.5" diameter). Must use a non-metallic, 100%organic clutch disc. Accepts either the stock starter or our 910-67475 starter.
Speedway has you covered if you need a "stump puller" starter for your Flathead Ford V8. Our gear reduction starter is built using all new components and cranks out 200 ft./lbs. of torque. It bolts to the original mounting points on 1932-1953 engines with manual trannys & steel flywheels.
Powermaster's MasterTorque Series gear reduction starters have a 1.4 Kw motor that cranks out 180 ft.-lbs. of torque. Fits Small Block Ford 289-302-351 with an automatic transmission or 5-speed manual transmission. Also works well with Speedway Flathead-to-C4 Automatic Conversion (910-28906).
Speedway Motors has all the parts you need to rebuild your Flathead Ford V8, including these high quality main bearings. Precision built to the high standards demanded by today's rodders and restorers, these tri-metal bearings are available in standard size, .010" or .020" undersize.
Things have changed considerably since the first Ford Flathead V8s were built more than 75 years ago, and Speedway Motors has the valve train parts you need to keep these vintage engines running on modern unleaded fuel.
Speedway Motors has all the parts you need to rebuild your Flathead Ford V8, including these high quality replacement rod bearings. Precision built to the high standards demanded by today's rodders and restorers, these bearings are available specially for the rods included in our Scat rotating assemblies in standard size, .001, or .010 inch oversize.
Speedway Motors is your Flathead Ford specialist! We've got you covered down to the smallest components, like this replacement oil pump drive gear. This gear fits on the rear of the camshaft and drives the oil pump. It's designed to fit 1949-1953 engines with D-shaped cam snouts,but can also be used on 1932-1948 style engines by modifying the cam's rear snout.
These strong, lightweight steel bellhousings are just the ticket for installing aMustang T5, Tremec TKO 500/600,or TR3550 manual transmission behind your 1949-53 Ford Flathead V8 engine. The compactdesign allows the bellhousing to fit in tight quarters and will accommodate up to a 10-1/2" clutch. Set up to use a clutch fork and release bearing,but can also be used with hydraulic release bearings.
These strong, lightweight steel bellhousings are just the ticket for installing a Toploader or Borg-Warner T-10 manual transmission behind your 1949-53 Ford Flathead V8 engine. The compactdesign allows the bellhousing to fit in tight quarters and will accommodate up to a 10-1/2" clutch. Set up to use a clutch fork and release bearing,but can also be used with hydraulic release bearings.