No items in Shopping Cart
This 4" diameter filler neck kit can be used as a replacement unit or for your custom fuel cell. Kit includes a mounting ring, rubber gasket, and bolts.
5752202Overall Length4.460"Overall Height2.000"Inside Diameter1.180"Outside Diameter1.500" (1 1/2")Thread Pitch1/8 NPTMaterial TypeAluminumFinishNaturalSold in QuantityEach
This flange bolts to your fuel cell to permit attachment of a 1-1/2"I.D. filler hose. Aluminum construction.
AFCO's billet aluminum radiator filler necks offer improved strength and appearance over stamped versions comes. Comes with a 1/8" aluminum hose nipple.
6175022Overall Length3.190"Overall Height0.560"Outside Diameter2.680"Material TypeSteelFinishZincSold in QuantityEach
These 1-1/2" inline hose adaptors allow you to put either a radiator fill cap inline. Use with a bleeder valve to get all air out.
Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the neck.Includes cap, chain, neck, gasket, and all hardware.Polyethylene cap is vented.Hole in tank needs to be 3-3/4" for cap to sit flush.
This neck allows you to fill your cooling system at the intake manifold if you radiator is lower than the intake. It can be flipped over for RH or LH upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units.Fill cap plate has a 7/16" pipe nipple welded into the overflow area.
91676550Overall Diameter5.000"Inside Diameter1.750" (1 3/4")Hose ID2.000"Material TypeAluminumSold in QuantityEachNotes6 mounting holes on a 4.36" bolt circle. Includes mount ring, bolts and gasket.
This inline filler neck installs into 1-1/2" O.D. upper radiator hoses. 100% aluminum construction. Includes a 1/8" straight aluminum overflow hose barb.
These filler necks come with a vented cap which vents to the underside of the cap. Steel weld-in 2.25" O.D. bung.Cap locks on the inside of the neck, not on the outside like a radiator cap.
These filler necks come with a vented cap which vents to the underside of the cap. Weld-in 2.3" O.D. bung.Bung is aluminum.
Replacement gasket for 4" fuel cell filler neck #910-76505.
Weld-in 2.3" O.D. bung. This aluminum filler neck bung includes a flange. Features vented cap which vents to the underside of the cap.
91734245Overall Width26.000"Overall Height18.750" (18 3/4")Overall Thickness3.250" (3 1/4")Filler Neck Height1.125" (1 1/8")Inlet Size1.375" (1 3/8")Outlet Size1.750" (1 3/4")Row QuantityDualTube StyleCrossflowTransmission CoolerNoMaterial TypeAluminumSold in QuantityEach