No items in Shopping Cart
Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends come in eitherforged steel or fully polished investment cast stainless steel for superior strength and durability.
Bolt to common late model lower control armsAvailable in 5/8" and 3/4" LH thread
These nylon bushings for 4 bar ends can be used for your custom build or as replacements for our kits. Fits rod ends with a 1.137" I.D. and rod end width of 1.050". Kit includes a set of 8 bushings.
These tubular strut rod ends bolt to common late model lower control arms and have either 5/8" or 3/4" LH thread.
Excellent for use as a medium-duty suspension rod endBall - case hardened steel hard chrome platedBody - Low carbon steel chromate treated
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. Sorry, no custom order chrome sleeves. Measurements are in assembled eye-to-eye lengths.
ASSEMBLY TIP:To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Chromoly body - 2 piece designDesigned for heavy duty applicationRough conditions steering/offroadBall - 52100 steel hard chrome plated Body - 4130 Chromoly
Shank and hole same size.
These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation.
91002939Overall Length4.000"Center Hole to End of Shank3Stud Length0.750" (3/4")Stud Diameter0.500" (1/2")ThreadsRH FemaleThread Pitch11/16"-18Thread Length2.000"Material TypeStainless SteelFinishPolishedSold in QuantityEachNotesFit closer to tapered hole compared to our 91002919 which is.150" shorter. 1-1/8" from center of threaded shaft to the bottom of the taper.
These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are teflon lined.