Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch

SAME DAY SHIPPING! Order within the next 29 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Height:
3.86
Overall Width:
6.75
Overall Length:
9.00
Sold in Quantity:
Pair
Finish:
Zinc
Tube O.D.:
2.50
Mounted Length:
5.00
Flange Thickness:
.24
Bolt Hole Pattern:
3 on 3.04"
Gasket(s) Included:
Yes
Hardware Included:
Yes
MFG. Part #:
H1130
Garage Sale:
No
Notes
Includes block off plates and clamps. 42 degree angle. Cut out length is 4.00" Expanded ends are 2.00" long on both sides.
Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch
Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 9.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes) = 5.00"
  • Cut out length (center of weld to edge of flange) = 5.50"
  • 40.4 degree angle

Specs

You may also be interested in:

Steel Exhaust Collector Ring, 3 Inch
SKU-91013370
                        Mild steel flanges can be welded to exhaust pipes, mufflers or header collectors so your exhaust system can easily be unbolted and removed. Flanges are 1/4" thick and feature the common 3-bolt mount pattern.
                    
Dougs Headers H1132 Exhaust Cut-Out Hook-Up Kit, 3 Inch
SKU-4471132
                        

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 10.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes = 6.00"
  • Cut out length (center of weld to edge iof flange) = 7.50"
  • 36.7 degree angle
Dougs Headers H1134 Exhaust Cut-Out Hook-Up Kit, 3-1/2 Inch
SKU-4471134
                        

Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

These hook-up kits are made for our electric cut-outs but can be used for other applications.

  • Overall length of pipe = 12.00"
  • Length of stepped pipe splicing into exhaust = 2.00" each side
  • Center pipe length (between stepped pipes = 8.00"
  • Cut out length (center of weld to edge iof flange) = 9.50"
  • 31.4 degree angle
Dougs Headers DEC250A Stainless Steel Electric Exhaust Cutouts-2.5 In.
SKU-447252
                        These rugged Doug's Headers electric exhaust cutout  kits allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
  • 2.500 in.
  • Stainless steel
  • Sold as a pair
  • Includes wiring harness
Dougs Headers DEC250AK Steel Electric Exhaust Cut-Out Kit, 2.5 Inch
SKU-447254
                        

Nothing gets a gearhead excited like the sound of open headers. Now you can uncork your exhaust with the push of a button. Watch the heads turn as within seconds your hotrod goes from mild...to wild! Dougs Headers electric cutouts offer superior design and function.

  • 304 stainless steel construction
  • High torque 12 Volt DC gear reduction motors
  • Self adjusting, self cleaning gate for leak proof seal
  • Zero obstructions when fully open
  • Harness pre-wired for easy installation
  • Reduced size permits greater installation options
  • Includes wiring harness, gaskets and hardware
  • Cutout kits included Y-pipe & band clamps for simple installation