This custom built, motor driven electric wiper conversion kit bolts to stock brackets and uses stock wiper transmisson and arms. It will clear the cowl vents and air conditioning systems. Two speed, 12 volt operation with self-park feature. Includes wiring harness, switch and nylon bushings for arms. NOTE: This wiper kit is designed for trucks that have the original vacuum wiper motor and linkage in place. Trucks that do not have the original electric wiper motor will need to acquire an original set of vacuum wiper motor linkage to complete this installation.
These custom built, motor driven wiper conversion kits bolt to the stock brackets and use the stock wiper transmission and arms. The unit will clear cowl vents and A/C systems. Two speed, 12 volt operation with self-park feature. Includes wiring harness, switch and nylon bushings for arms. 913-56148 Instructions (PDF)
Compact self-contained wiper motor drives one wiper arm and blade making it perfect for your early Coupe or Roadster. The wiper motor has a switch on the back.12 volt motorIntegral switch90° sweep10" wiper bladeFor replacement parts use blade 911-23506 and arm 911-23505. Electric Wiper Motor Installation Instructions (PDF)
These custom built motor driven wiper conversion kits bolt to the stock brackets and use the stock wiper transmission and arms. The unit will clear cowl vents and A/C systems. Two speed 12 volt operation with self-park feature. Includes wiring harness switch and nylon bushings for arms.913-56148 Instructions(PDF)
Fits most 1932-36 Ford roadsters with a rectangle frame. Mounts to top of the windshield frame. Clamps to frames as wide as 3/4" and as narrow as 9/16". Includes wiper motor, mount, wiper arm, wiper blade and wiring harness. Wiper switch not included. Length of arm center of shaft hole to end of arm is 5-3/4" Mounting hole is for 1/4" shaft Overall length of blade is 6-1/4" Rubber part of blade is 5-13/16" Comes with mounting clips, pigtail for wiring, and instruction sheet Total Shaft Length: 2.6" Motor Length: ...