Products to Compare (max of 3)
X
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
Shop By
Support
Account

Electric Trunk Lift Kit

Free Shipping Free Shipping
Specs
Sold in Quantity:
Each
Hardware Included:
Yes
Stroke:
13.00
Notes
Includes wiring harness. Max working capacity is 61 lbs.
Electric Trunk Lift Kit

Click image to enlarge

Please note the following about this product:

  • This product is discontinued.

Details

Reviews (2)

Q & A (9)

What's in the Box

Info

It's cool to open your trunk with just the flip of a switch! This kit includes the motor, gear box, mounting kit, switch and instructions. Must be used with existing trunk hinges.

  • Primary arm is 8-1/2" long
  • Secondary arm is 6" long center to center of pivot point
  • Shaft with arm protrudes 2-1/2" from main body
  • Total travel of the arm is 13" (measured at knee pivot)
  • Overall dimensions with flange, but not including arm, are 10-1/2" x 9-1/16" x 1-3/4" thick
  • The main body without flange for mounting is 8-1/2" x 9-1/16" x 1-3/4" thick

Mounting flange on arm is 1" from center to mounting surface 

Max working capacity is approximately 61 pounds. Does not have a limit switch up or down. 

Trunk Lift Kit Installation Instructions (pdf) 

Notes

Wiring info:

The switch included has 5 terminals that are wired as follows-

Center wire (# 3 position on switch) is black :  12 Volt +

# 2 & # 4 wire positions are both red : Ground

# 1 green & # 5 blue switch wires go to the 12 wires (red & blue) on the motor and they can be wired in either combo - i/e green to red & blue to blue or green to blue & blue to red

Specs

  • Primary arm is 8-1/2" long
  • Secondary arm is 6" long center to center of pivot point
  • Shaft with arm protrudes 2-1/2" from main body
  • Total travel of the arm is 13" (measured at knee pivot)
  • Overall dimensions with flange, but not including arm, are 10-1/2" x 9-1/16" x 1-3/4" thick
  • The main body without flange for mounting is 8-1/2" x 9-1/16" x 1-3/4" thick
  • Mounting flange on arm is 1" from center to mounting surface
Suggestions