Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish

SAME DAY SHIPPING! Order within the next 2 hours 13 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Overall Height:
4.80
Sold in Quantity:
Each
Finish:
Endurashine
Port Height:
1.87
Port Width:
1.15
Mounted Height:
4.27
MFG. Part #:
27014
Garage Sale:
No
Intake Manifold Type:
Dual Plane
Carburetor Quantity:
One
Carburetor Flange Type:
4-Barrel Square Bore
Notes
Edelbrock reccommends a 500-650 CFM carb.
Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum street performance gains.

325-27014 Instructions (PDF)

Notes

So, what is EnduraShine? It's an amazing finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This revolutionary new coating won't fade or oxidize and cleans up easily with soap and water.

The secret to the success of EnduraShine is its three-step coating process. First a base coat is applied for adhesion and smoothing properties. A second coat of metal is then applied in a high-tech vacuum chamber for a complete and consistent coat that is actually thinner than a human hair. The third and final coating includes a clear powder coat for the ultimate protection and durability. This all adds up to great looks, exceptional value and long-term durability.

Features include:

  • Brilliant Shine...won't oxidize, fade or discolor like chrome or polished aluminum
  • Economical Alternative...unique three-step coating process offers a show-quality finish
    for a fraction of the cost of chroming or polishing and is environmentally friendly
  • Durable Finish...easily cleans with soap and water and looks great with a coat of
    your favorite car wax

Specs

  • Port exit dimensions: 1.15" x 1.87"
  • Carb pad height: 4.27"
  • Edelbrock reccommends a 500-650 CFM carb

Item Details

Endurashine Finish

Customer Reviews

Rated 4.7 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Brad
Verified Purchaser
Woodstock, Il
Product Rating

Replace two barrel with Edelbrock 650

October 21, 2011
Combined with the carb, the endurashine looks really cool.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Doug
Verified Purchaser
San Tan Valley, AZ
Product Rating

I liked it BUT!!

July 24, 2012
I have installed on my sb 400. The product is beautiful and really looks good with my project. However, there are two small points on each side where the valve covers hit the manifold and will not tighten down to the valve cover gasket. I have had to add a thicker gasket and make slight modifications to the valve covers to get them to fit. I have not started the car yet so am hoping the valve covers do not leak.
Pros:
  • Beautiful product Looks
  • great
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

castillo1951
Verified Purchaser
Product Rating

This product looks great

July 07, 2013
Speedway yall are great , shipping is fast ,easy to order
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
32527014

Product Q&A

2 questions : 2 answers

1 answers

will this fit 1967 327

dewey1953
July 18, 2014

will this fit 1967 327

Answers

July 18, 2014
EricM
Yes this will fit your '67 327.
1 answers

have a 92 chevy 350 engine will this fit my engine

May 22, 2011

have a 92 chevy 350 engine will this fit my engine

Answers

June 22, 2011
Jason
No, you will need part #32527164
Page 1 of 1

You may also be interested in:

Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
(Part #91011265)
                        

If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.

  • RPM range is 1500-6500
  • Available plain or show polished
  • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
  • Cast-in nitrous bosses
  • Water outlets at all four corners
  • Dual distributor hold-downs
  • Provisions to add an oil fill tube
  • Accepts late model waterneck, A/C, alternator, and HEI

910-11265 Dyno Sheet (PDF)

910-11265 Instructions (PDF) 

Edelbrock 2701 Performer EPS Chevy Intake Manifold
(Part #3252701)
                        

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

IMCA racing approved.

325-2701 Instructions (PDF)

Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
(Part #3252703)
                        

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

325-2703 Instructions (PDF)

Edelbrock 20214 EPS Single-Quad Intake Manifold/Carburetor Kit, Chevy
(Part #32520214)
                        

With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.

  • Varying Manifold And Carburetor Combinations
  • Suits Engines Air/Fuel Requirements
  • Chrome Fuel Inlet
  • High-Quality Edelbrock Intake Gasket Set
  • Includes Gasgacinch Gasket Sealer
  • All Necessary Hardware Included
  • EnduraShine Finish
  • Resists Discoloration From Heat

Edelbrock 27011 Performer EPS Intake Manifold, Small Block Chevy
(Part #32527011)
                        Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
  • Polished Version
  • Polish is Hand-Buffed for Brilliant Shine
  • Maximizes Performance with Edelbrock Carburetors
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order

Installation Instructions (PDF)

Speedway Small Block Chevy Intake Gasket Set, 1205 Style, Standard
(Part #91010207)
                        

Speedway high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

  • No end seals - use silicone gasket maker
  • Heat crossover port is blocked
  • Compare to Fel-Pro