Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Aluminum
Overall Height:
4.56
Sold in Quantity:
Each
Finish:
Natural
Port Height:
1.86
Port Width:
1.04
MFG. Part #:
5412
Intake Manifold Type:
Dual Plane
Carburetor Quantity:
Three
Carburetor Flange Type:
2-Barrel 3-Bolt
Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold

Click image to enlarge

Speeday Motors Logo
X
Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold

Details

Reviews

Q & A

What's in the Box

This intake for 3 deuces on a small block Ford does NOT have clearance for the Powerfire, Flamethrower, OEM, or any HEI style distributor. It requires the smaller cap as available on distributor 547-8352
  • 289-302 Small Block Ford 3 deuce aluminum intake
  • Designed to use 3 bolt carburetors such as the Speedway 9 Super 7's
  • For Stock/OEM standard deck
  • RPM range, Idle-5,500
  • Low Rise, Dual-plane design
  • Improved throttle response
  • Made of aluminum
  • Natural finish

You may also be interested in:

Set of 3 Speedys 9 Super 7 Chrome 3-Bolt 2 Barrel Carburetors
                        

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9 Super 7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9Super7 carb shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb tri power set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary Carburetor Instructions (PDF)

Lokar TRP-4006 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Bracket
                        

Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s.  In Stainless steel with throttle return springs.

  • Fits most early carbs with 3 bolt mounting flange
  • Stainless Steel
  • With throttle return springs

 

Lokar TRP-4007 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Plate
                        

Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s. 

  • For use with 3-bolt carburetors 
  • Stainless Steel
  • Mounting plate only
Lokar XTRP-4006 Midnight Series 3 Bolt Carb Throttle Cable Mounting Bracket
                        

Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s.  In Black finish with throttle return springs.

  • For use with 3-bolt Stromberg style carburetors
  • Tri-Power throttle cable / kickdown cable bracket
  • Black finish
  • With throttle return springs
Lokar XTRP-4007 Midnight Series 3 Bolt Carb Throttle Cable Mounting Plate
                        

Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s. 

  • For use with 3-bolt Stromberg style carburetors
  • Tri-Power throttle cable / kickdown cable bracket
  • Black finish
  • Mounting plate only
MSD 8352 Ford 289-302 Ready-To-Run Distributor
                        

MSD’s Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8” smaller in diameter to accommodate induction setups and tight engine compartments.

  • Simple and clean installation with only three wires to connect
  • Powerful built-in module produces a 7.5 amp single spark through high rpm
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing is 5/8” smaller in diameter than stock Ford distributors
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing
  • Advance plate and weights are fine blanked from Chromoly steel and QPQ coated for friction reduction
  • Mechanical advance assembly can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
  • Nylon pads ensure smooth operation of the advance weights
  • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved

547-8352 Instructions (PDF)

MSD Rebate (Link)

Set of 3 Speedys 9 Super 7 3-Bolt 2 Barrel Carburetors, Plain Finish
                        

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9Super7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9 Super 7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb tri power set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary Carburetor Instructions (PDF)

Fel-Pro Gaskets 1250 Small Block Ford Intake Gasket Set-1.20x2.00 Port
                        

Fel-Pro Blue Stripe intake manifold gasket sets for 1962-1986 Ford, Mercury V8 260, 289, 302 (except "BOSS") and 351W V-8.