Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Dual Outlet Master Cylinder Steel Dual Brake Line Kit

SAME DAY SHIPPING! Order within the next 14 hours 3 minutes and receive same day shipping

Specs
Material Type:
Steel
Sold in Quantity:
Kit
Thread Pitch:
3/8"-24
Garage Sale:
No
Tube O.D.:
.19
Notes
The longer of the two lines measures app. 12" from the bend to the end, the other is 8.25"
Dual Outlet Master Cylinder Steel Dual Brake Line Kit
Dual Outlet Master Cylinder Steel Dual Brake Line Kit
Dual Outlet Master Cylinder Steel Dual Brake Line Kit
Dual Outlet Master Cylinder Steel Dual Brake Line Kit

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

  • Features tight 90° bends at the master cylinder end
  • Both ends of both lines are 3/8"-24 inverted flare nuts
  • The longer of the two lines measures app. 12" from the bend to the end

Customer Reviews

Rated 4.6 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
4
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

mike
Verified Purchaser
colorado

very discriptive

May 11, 2015
installing new master cylinder. These made it very easy and professional looking.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

1949shoebox
Verified Purchaser
Tennessee

great to get started with new lines from

October 09, 2014
Installing all new brakes on a shoebox ford this was a great way to get away from the mc to install the residual valves as proportioning vale.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

henry23t
Sunnyvale Ca. USA

dual outlet master cylinder brake line k

October 01, 2014
since the brake line have a 90 degree angle. you can bend them to any way you want too. from the master cylinder, going outward..
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

oldman40
Verified Purchaser
Nebraska

Does the job but with use of other line,

July 22, 2014
I used the kit, but the end fittings should be the 1/2 for the attachment to either master cylinder or p/valve. I removed the valve for use with drum front & rear. Since you were out of the adaptor fittings, I could only use lines from kit for the tee fitting to front brakes.I had to buy new 1/8 & 3/16 then cut and flare using old fittings to master cylinder.If kit is for lines from or to master cylinder they should fit.
Pros:
  • quality line
Cons:
  • doesn't have needed fitings.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

vagabond
Verified Purchaser
Minnesota, USA

Just what I needed -

December 02, 2013
Perfect for the job. ////////////// Worked as expected.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 2 answers

2 answers

length of each line from master cyl.

Gas Houser
M.B. Canada @ Casa Grande Az.
September 11, 2012

length of each line from master cyl.

Answers

December 03, 2013
vagabond
The lines worked fine for attaching pressure accy..
September 11, 2012
Jason
Short line measures 1 3/4" out from master cylinder and 8 3/8" long Long line measures 2 1/16" out from master cylinder and 12" long
Page 1 of 1

You may also be interested in:

IFF Brass Union Coupler, 3/8 Inch-24 IFF to 3/8 Inch-24
(Part #91031832)
                        Couple two brake lines together with these handy fittings. 3/8"-24 female to female thread. Brass.
                    
AN to IFM Adapter
(Part #910318)
                        

Fittings are zinc plated. Select from:

  • 3/8"-24 IFM - AN 3 Male - Steel 
  • 7/16"-24 IFM - AN 3 Male - Steel
  • 1/2"-20 IFM - AN 3 Male - Steel
  • 9/16"-18 IFM - AN 3 Male - Steel
Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
(Part #91031802)
                        

This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

  • Features tight 90° bends at the master cylinder end
  • Both ends of both lines are 3/8"-24 inverted flare nuts
  • The longer of the two lines measures app. 12" from the bend to the end
1/2-20 IFM to 3/8-24 IFF Adapter
(Part #9103183-1/2)
                        

Brass adapters. Select from:

  • 3/8"-24 IFM to 7/16" - 24 IFF
  • 7/16"-24 IFM to 3/8" - 24 IFF
  • 1/2"-20 IFM to 3/8" - 24 IFF
  • 9/16"-18 IFM to 3/8" - 24 IFF

Item Details

Note: "3/8" size is a 3/8"-24 IFM to 7/16"-24 IFF and the "7/16" size is 7/16"-24 IFM to 3/8"-24 IFF