This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. It will come with everything that you'll need to set up your IMCA racers front suspension. Kit includes: Collar for Adjustable A-Arm 5/8" Swedged Steel Sleeves 5/8" RH Clevis 5/8" RH Jam Nuts Std 5/8" LH Male Heims 3/4" Jack Bolts & Mounts RH & LH Lower A-Arm Screw-in Ball Joints 1973-77 Intermediate GM Spindles 1973-77 GM Midsize 11" Rotors, 5 on 5" 5/8" Lug Nuts 5-1/2" Tru-Coil Springs Seals ...
This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars. Assembled kits for easy ordering No modifications necessary-simply choose your application and go Reduced suspension "stiction" Increases ability to transfer weight Precision ...
This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars. Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings. Assembled kits for easy ordering ...