Rear shock mounting bolt has a 1/2" stud and a 5/8" shank. The under head length on this bolt is 2.75", and 1.5" of that is threaded. Bolts sold individually.
Set includes 3-3/4" long bolts with shims for Chevy mini starters with straight bolt pattern (not angled).
These stainless bolts/hardware are for 1928-1931 Model A Ford headlight bars. They come as a set of four bolts, washers, and nuts, to fasten one complete bar. Stainless steel Set of four bolts, washers, and nuts
Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2-1/4" wide rear Ford half-ton multi-leaf springs. 3" center to center mounting 8-5/8" overall length and 8" inside 2-3/8" inside width for 2-1/4" spring Bolts have 9/16" rolled threads and include flat washers and nylock nuts.
These rugged 2-1/4" x 3-1/4" zinc plated U-bolts will securely attach the front or rear spring to the crossmember. Apply an anti-seize compound to ensure that the threads are not damaged upon assembly.
Speedway leaf sping axle U-bolts are heat treated and zinc plated to ensure long life and durability. All bolts are 1/2" diameter. Fits 3" diameter axle tubes.
These lighted stainless steel bolts were designed to be used with license plates but with a little imagination, the options are endless. Fully-sealed waterproof design is also shock and vibration-proof. Map light Dash light Courtesy lamp Sold by the pair. White color bulb only.
These 2-1/4" x 3-1/4" stainless steel U-bolts will keep your front or rear suspension looking sharp for years. Apply an anti-seize compound to ensure that the threads are not damaged upon assembly.
Weight equals speed so the lightweight components are key to any race team. Titanium is 42% lighter than steel to make you lighter and faster. 3/8"-24 with 9/16" Hex Head These fine thread titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight.
These fine thread titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight.
3/8"-24 with 9/16" Hex Head These fine thread titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight.
Tru-Lite titanium .875" O.D. button allen head bolt for mounting racing seats to your chassis. M ade from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.
Radius Rod Bolt Only. Titanium.
Bert Racing Transmission Replacement Parts
Panhard bolt for BSB adjustable pinion mount. Complete with one adjuster, bushing and bolts.
Small Block Chevy Harmonic Balancer Bolt and Washer. Chevy V8 262-400, 12 point.
Striker pin for Mini Bear Jaw door latches.
Fully threaded. Grade 8. These bolts fit our torsion bar stops.
Jet Mod and Viper car components.