No items in Shopping Cart
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45 flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line. If using 37 AN fittings with stainless steel line, use 910-89524.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
Stainless steel braided line available in AN6, 8, 10, and 12. This stainless line can also be used for low pressure applications like fuel, water, air or oil. Not to be used for brake or power steering applications.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 1-1/2"to 2" wide.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 2-1/4"to 2-3/4" wide.
Complete your '23T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.