ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

10 Inch Chrome Air Cleaner, 4 Barrel Carb.

SAME DAY SHIPPING! Order within the next 9 hours 33 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Height:
2.00
Sold in Quantity:
Each
Finish:
Chrome
Overall Diameter:
10.00
Garage Sale:
No
10 Inch Chrome Air Cleaner, 4 Barrel Carb.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a raised base and have a 10 inch diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

10 Inch Chrome Air Cleaner - 4 BBL Carb

  • Chrome plated steel
  • 10" diameter and 2" tall filter element
  • Fits 4 barrel carbs with 5-1/8" neck
  • includes stud and wing nut

Item Details

4 bbl carb

Customer Reviews

Rated 4.8 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Steve
Verified Purchaser
Verified Reviewer
Omaha

Crome Air Cleaner

July 10, 2015
quad carb nice fit none
Pros:
  • Perfect Fit
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Bruiser
Verified Purchaser
Verified Reviewer
Bismarck N.D.

Good product that fits very well for hood clearance problems

May 25, 2015
Used on a Corvette which helped very well for hood clearance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

wallin the auto teacher
Verified Purchaser
Swink, co

Ihave bought this product several times before.

May 13, 2015
this product is great for the price.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Dannywayne
Verified Purchaser
Afton,OK

Breather

June 19, 2014
Prompt shipping and product as ordered...would recommend this to other people..
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Studeman
Verified Purchaser
Nixa, MO

Excellent fit!

December 02, 2010
Used it in my '59 Studebaker Hawk.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 2 answers

1 answers

Interference problem with my automatic choke housing My automatic choke housing is about 1/2" higher than the carburetor flange. Will this air cleaner clear It? On many air cleaners, the base drops down and won't clear the choke housing.

64Chero
Atlanta, GA
February 12, 2015

Interference problem with my automatic choke housing My automatic choke housing is about 1/2" higher than the carburetor flange. Will this air cleaner clear It? On many air cleaners, the base drops down and won't clear the choke housing.

Answers

February 13, 2015
Tech
You are correct that is a common issue with carbs that have choke housings. You may need to run a spacer to raise the air cleaner base.
1 answers

Fit and Filters Does "raised base" mean "recessed" down over the carburetor like many 14 inch air cleaners? Any issues with Rochester Quadrajet secondary air valve control mount? Will the Fram CA192 (nominally 10 inch) filter fit properly (ID and OD)?

cch80124
September 26, 2013

Fit and Filters Does "raised base" mean "recessed" down over the carburetor like many 14 inch air cleaners? Any issues with Rochester Quadrajet secondary air valve control mount? Will the Fram CA192 (nominally 10 inch) filter fit properly (ID and OD)?

Answers

September 26, 2013
Jason
No this air cleaner does not recess down, the base actually does rises up. The bottom of the filter is about ¾” above the carburetor mount surface. Total height of the assembly is approximately 3 1/8” from the carburetor mount surface to the top (center) of the lid. A wing nut would stick up above that. The filter provided measures 9 5/8” OD and 8 1/8” ID. The housing will allow a filter up to 9 11/16” OD but anything larger than that will not fit correctly. You shouldn’t have any issues using this air cleaner on a Quadrajet carburetor.
Page 1 of 1

You may also be interested in:

Tri-Bar Wing Nut for Air Cleaners, Black
(Part #5503426)
                        

These air cleaner wing nuts are just what you need to top-off that new air cleaner assembly. They are made to fit any steel or aluminum air cleaner assemblies.  Wing nut is approximately 5/8” tall with 1/4"-20 threads.  Wing nut will fit 5/16"-18 thread also.

Tri-Bar Wing Nut, Black

  • 5/8” tall
  • 1/4"-20 threads
  • chrome/steel
Speedway Air Cleaner Base Gasket
(Part #91011101)
                        

Seals between air cleaner and standard 5-1/8" air horn. Prevents dirt from entering your engine. This reusable Speedway gasket has stainless steel ring embedded in durometer-tested neoprene rubber. Won't collapse, tear or lose its shape.

Speedway Illustration

6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb, 2-5/8 Inch Neck
(Part #5504350)
                        

Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb.

  • Chrome plated steel
  • 6-3/8" diameter and 2-1/2" tall filter element
  • Fits 2 barrel carbs with 2-5/8" neck
  • includes stud and wing nut
  • non-restricting flame retardant filter
  • unique sculptured design to fit most applications
  • performance engineered for increased breathing
  • designed to perform with todays large displacement engines

Does not fit 1968 and later cars equipped with factory air temperature control valve.

Item Details

2 bbl carb
12 Inch Oval Chrome Air Cleaner
(Part #91011028)
                        

Just the ticket to top off your chromed out engine. Fits 5-1/8" carb necks which includes most 4 barrel Holley, Edelbrock, Demon, Q-jet and or Ford carbs (also fits Holley & Ford 2-bbl carbs with 5-1/8"neck).

Measures 12" long x 8" wide x 3-1/8" high with a 2" tall element. Includes carb stud and wing nut.