Adapter kit includes boot, pushrod, and adapts Wilwood master cylinder 260-4893 to Wilwood clutch/brake pedal bracket or other pedals with a 2.23" vertical mount centerline or a 3.22" horizontal mount centerline. Aluminum construction with a black anodized finish.
Adapter kit includes boot pushrod and adapts Wilwood master cylinder 260-4893 to Wilwood clutch/brake pedal bracket or other pedals with a 2.23" vertical mount centerline or a 3.22" horizontal mount centerline.Aluminum construction with a black anodized finish.
This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.2:1 pedal ratio External return spring ...
You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths. You will also want to buy the banjo fitting kits and the Wilwood master cylinder. NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.
Speedway 3/4" small master cylinder Speedway pull-type slave cylinder 5/16" RH female heim 6:1 ratio Wilwood floor mount clutch pedal
Speedway 3/4" small master cylinder Speedway pull-type slave cylinder 5/16" RH female heim 7:1 ratio Wilwood swing mount clutch pedal
You have finally found that T56 6-speed to put behind your LS1 and now are ready to hook up the release bearing. You will find a funky quick disconnect hose fitting and nothing to connect it up to. Thiscustom hose has the disconnect fitting oneend and an AN4 on the other allowing you to hook it up to a common Wilwood master cylinder.Available in three lengths. You will also want to buy the banjo fitting kit Wilwood master cylinder and disconnect tool.Note: These lines are for F-Body Camaro/Firebird specific T56 ...