No items in Shopping Cart
Uses the two original holes in the floor to mount the bracket. The clamp secures the bracket to the column.This floor mount is strongly recommended with all Tri-Five Installations.
Universal lower floor mount plate works on all 1-3/4",2",or 2-1/4" diameter steering columns by simply removing the locking inter rings to the size of your column. Made out of chrome-plated aluminum for a clean finish.
This is the boot for Ididit steering column floor mount kits 446-2400, 446-2401, and 446-2402.
This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available.
This cool tilt column is just like what you have in your car, plus you can put a neat steering wheel on it and add turn signals. Choose either the chrome or paint-to-match plain finish. Use with three-bolt steering wheel adapters and check out our selection of steering wheels.
Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.
Mounting your steering column to the firewall or floor can be a real challenge.Ididit's steel band swivels are an easy and inexpensive solution.
Mount puts the steering column at a 60 degree angle to the firewallFits all of our deluxe t bodies with the floor / firewall installedDesigned to be used with a 1-3/4" diameter steering column
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
1 in. 48-spline output shaftFor dash ignitionBlack powdercoatedUses original under dash mount and floor moutUses factory wiring and plug
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.