No items in Shopping Cart
Chrome plated steel 4 barrel air cleaner. 10" diameter and 2"tall filter element.
Just the ticket to top off your chromed out engine. Fits 5-1/8" carb necks which includes most 4 barrel Holley, Edelbrock, Demon, Q-jet and or Ford carbs(also fits Holley & Ford 2-bbl carbswith 5-1/8"neck).
14" diameter with 3" high filter to fit 4 bbl. carbs. with 5-1/8" or 7-5/16" diameter necks. Offers the racer maximum air flow with only 2-1/2" stack height above the carburetor lip.
Chrome plated steel 4 barrel (5-1/8" neck) air cleaner. 14" diameter and 2"tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.
Chrome plated steel 4 barrel carburetor air cleaner. 14" diameter with a 3" tall paper filter element.Fits carbs with 5-1/8" necks. Includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.
Why keep buying paper elements when this one could last a lifetime? This air cleaner assembly features a washable element, a beautiful chrome plated top and base designed for the common 5-1/8" carb neck.
K&N chrome velocity stack has a 5-1/8" carb neck, 10.5" overall height, and 9" x 5" filter element.
Chrome plated steel 4 barrel carburetor air cleaner. 14" diameter with a 4" tall paper filter element.Fits carbs with 5-1/8" necks. Includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.
Chrome plated steel housing with paper filter element. Fits4 bbl. carbs with 5-1/8" neck. Hasa 6-1/2" O.D. and is 3-3/4" tall from the base to the highest point on the top.
Chrome plated steel 4 barrel carburetor air cleaner. Fits carbs with 5-1/8" necks. Has a 14" diameter with a 3" tall paper filter element. Includes a tri-bar wing nut, a mount stud and an adapter for the PCV inlet hose.
Chrome steel top and base3" paper element & polished steel mounting stud includedFits single quad carburetors with 5-1/8" neckDrop base
Polished aluminum top with chrome steel base3" paper element & polished steel mounting stud includedFits single quad carburetors with 5-1/8" neckFlat base
These 14" drop base air cleaners have a unique velocity stack design which drops 1-1/4" below carburetor flange. Each assembly features chrome plated top & bottom plates with 1/4" stud hole (stud not included). Also comes with rubber and steel mounting washers, but we recommend using SuperSeal gaskets 910-11101 for a complete seal.
14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip. Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.
K&N Air Filter Cleaner is the only cleaner recommended to clean K&N Air Filter elements. K&N Air Filter Cleaner works to dissolve dirt build up and old filter oil and can be washed away with water. It is environmentally friendly and safe on paint, chrome, cast aluminum, plastic, rubber and vinyl when used as directed (do not use on polished or anodized aluminum). Complete instructions on bottle.
Takethe solid lid off your 14" diameter air cleaner, replace it with this, and increase the air flow to your carb by 30%. Washable multi-layer cotton gauzefilter media. Unit is 1.5" tall at center.
Just the ticket for that tri-power setup! Chrome plated steel housing with4" x 2" replaceable paper element. Fits Holley 94, Stromberg 97, Speedway 9 Super 7, Demon 98 and Rochester 2 barrels (all with 2-5/8" neck).
Tru-Helmet air cleaner which fits all carburetors with a 2-5/8" neck. Chrome plated steel. Uses 3-7/8" filters.Works with Holley 94, Stromber 97, Speedway 9 Super7, and Rochester 2 barrels with 2-5/8" neck.
Just the ticket for that tri-power setup! Chrome plated steel housing with4" x 2" replaceable paper element.Fits Holley 94, Stromberg 97, Speedway 9 Super 7, Demon 98, and Rochester carbs with 2-5/8" neck size.
Just the ticket for that tri-power setup!These chrome plated steelair cleaners have a 4" x 2" replaceable paper element and will fit 2-5/8" and 2-5/16" carbs.
5502085Overall Height4.500" (4 1/2")Inside Diameter5.125" (5 1/8")Diameter Small End5.450"Diameter Big End8.875" (8 7/8")Material TypeSteelFinishChromeSold in QuantityEach
Polished aluminum top and basePaper element & polished steel mounting stud includedFits single quad carburetors with 5-1/8" neck
Keep the bigger and most damaging particles of sand, dirt, clay and oil drips from getting to and clogging the fins of your air cleaner element. Fits 14" air cleaner elements. Available 3" tall.
Oval replacement paper element, 12" long x 2" high.
This Edelbrock dual-quad air cleaner clears HEI distributors and all stock components. It will fit all Edelbrock dual-quad manifolds and others with 6-7/16" carb center-to-center. They come with high-quality K&N 2-1/2" washable, pre-oiled cotton gauze filter for excellent filtration.
These dual-quad air cleanersfrom Edelbrock look "just right" on any nostalgia rod or muscle car. Additionally, their smallsize provides adequate hood clearance in demanding applications as well as a coordinated appearance with the classic finned look.The Classic Series air cleaners are available in a classic polished aluminum finish. They come with medical grade, pre-oiled cotton gauze element for excellent filtration.
This all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner. It uses an over-the-counter 14" x 4" replacement element. It's even notched out in the back to clear a GM HEI distributor. Fits 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).
There is nothing sweeter looking or sounding than a dual quad on a Chevy! This one kit gets you twomanual chokeEdelbrock carbs, an Edelbrock unpolished intake manifold, fuel line and special progressive linkage. Just add a suggested air cleaner to finish your installation. Will clear HEI distributors. 6-7/16" carb centers.
Seals between air cleaner and standard 5-1/8" air horn.Prevents dirt from entering your engine. Reusable SuperSeal(TM) has stainless steel ring embedded in durometer-tested neoprene rubber.Won't collapse, tear or lose its shape.
Steel air cleaner stud. 1/4" x 6" long.
Steel air cleaner stud. 1/4" x 9" long.
Speedway's Sure Seal Housing is manufacturedfrom spun aluminum with an O-ring seal.Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4". Includes air cleaner assembly,aspacer with anO-ring on the carburetor side (choose height), and a 1/4"-20 air cleaner stud.
Spun aluminumFits HolleyHousing to carb O-ring seal14" diameter filterHousing assembly weighs 2.1 lbs.
Speedway's Sure Sealair cleaner baseis manufacturedfrom spun aluminum.Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4".
Includes the reusable K&N Filtercharger filter element for maximum airflow, filtration, and serviceability. Will not fit Holley Pro Series (Dominator).
Theses highly polished aluminum air cleaners have the look of billet without the expense. Attractive ball milled top. Fits carburetors with5-1/8" air horns.
This highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.
15" x 8.5"Deep 2" finsPolishedPaper filter and hardware includedFits single quad carburetors with 5-1/8" neck
Theses highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.
91011093Overall Height3.875" (3 7/8")Overall Diameter8.000"FinishNaturalSold in QuantityEachNotesFits 5-1/8" carb necks, uses 6-1/4" x 2-3/8" filter element.
Keep the bigger and most damaging particles of sand, dirt, clay and oil drips from getting to and clogging the fins of your air cleaner element. Fits 14" air cleaner elements. Available 4" tall.
Keep the bigger and most damaging particles of sand, dirt, clay and oil drips from getting to and clogging the fins of your air cleaner element. Fits 14" air cleaner elements. Available 5" tall.
Designed to fit Edelbrock dual-quad set-ups, this oval air cleaner clears HEI distributors and stock parts. Comes with high-quality 2-1/2" washable, pre-oiled cotton gauze filter for excellent filtration. The oval top comes in a natural, aluminum finish for custom painting. Dimensions: 13-1/2" x 7". 6-7/16" carb center. Edelbrock dual quad air cleaners include a K&N filter element. Finned aluminum. No logo.