No items in Shopping Cart
Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.
Boy these fittings are hard to find!90 style for or 5/8" hose. 1/2" NPT thread. Can be used for intake and water pump.
Boy these fittings are hard to find! Short style for 5/8" hose. 1/2" NPT thread. Can be used for intake andwater pump.
Boy these fittings are hard to find! 90 style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.
Boy these fittings are hard to find! Long style for 5/8" hose. 1/2" NPT thread. Can be used for intake and water pump.
Boy these fittings are hard to find! Long style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.
Boy these fittings are hard to find! Short style for 3/4" hose. 1/2" NPT thread. Can be used for intake andwater pump.
Chrome fittings are the perfect finishing touches for your fuel system. All fittings are male hose barb to male pipe thread.
What can we say about chrome plated brass fittings? They are the perfect finishing touches for your fuel system. All fittings are male hose barb to male pipe thread.
Eliminate ugly fittings and adaptors with this chrome dual feed line with mandrel bends and 3/8" hose barb, providing excellent fuel flow. For Holley 4160-style vaccuum secondary (side hung float bowl) 4-BBL carburetors with 8-21/32" centers.
Crimp-on heater hose O-ring straight fitting.
Item 4281317 has been DISCONTINUED and is no longer available for sale. We do not accept backorders on this item.
Use this billet aluminum hose barb fitting in place of the ugly old brass fittings. These aluminum fittings accept 5/16" or 3/8" I.D. hose (must be clamped) and thread into 1/8" NPT.
1/8" NPT and screw into most standard radiator transmission coolers. Straight, 45 and 90 for 5/16" steel line or straight for 5/16" rubber hose.
Kit includes enough -8 AN push-on neoprene/rubber hose (1/2" I.D.) to run two 24" lines from your oil filter block adapter to your remote oil filter bracket. Also includes two 1/2"NPT hose ends, two -8 ANhose ends and two 1/2"NPT to -8 ANsteel fittings.
Kit includes enough -8 AN push-on neoprene/rubber hose (1/2" I.D.) to run two 48" lines from your oil filter block adapter to your remote oil filter bracket. Also includes two 1/2"NPT hose ends, two -8 ANhose ends and two 1/2"NPT to -8 ANsteel fittings.
These hose test fittings simply screw into common AN hose ends and allow you to pressurize with air and submerge in water. Easy to use.
Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.
These hose test fittings simply screw into common AN hose ends and allow you to pressurize with air and submerge in water. This complete kit comes with one of each 3, 4, 6, 8, 10, 12, and 16 AN fittings with steel Schrader valve.
Push-on style with 90 steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.
Aeroquip FC300 spec hose to be used as the fuel or power steering line. Hose only works with listed fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable. Hose sold by foot.The AN6 high pressure hose has an ID of 0.31" and an OD of 0.67". The maximum operating pressure is 2250 psi and the minimum bend radius is 4". Its applications include: power steering lines, hydraulics, air, gasoline, fuel, lubricating oils, over the wall air tools, and DOT-approved air brakes. This high pressure hose ...
Aeroquip FC 300 spec hose to be used as the fuel or power steering line. Choose AN 10 and fittings required.
Aeroquip FC300 spec hose to be used as the fuel or power steering line. Hose only works with listed fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable. Hose sold by foot.The AN8 high pressure hose has an ID of 0.41" and an OD of 0.77". The maximum operating pressure is 2000 psi and the minimum bend radius is 4.62". Its applications include: power steering lines, hydraulics, air, gasoline, fuel, lubricating oils, over the wall air tools, and DOT-approved air brakes. This high pressure hose ...
The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.